Needle Sizes/Syringes for Test E/HCG

[trance22]

Okay for the Test E I will use a 3cc syringe with a 18G x 1.5" needle to draw it out and then replace the needle with a 25G x 1" to pin it.

Does that seem right?

For the Human Chorionic Gonadotropin (HCG) I have .5 cc 29G x .5" syringe to pin it. Will I need a different size needle to draw the Human Chorionic Gonadotropin (HCG) out?

Thanks

 

[SonOfZeu$]

yea it seem right, i just drew with my 25g and injected with it too, does go a bit slower but w.e, Buddy the needle you draw with don't matter unless your drawing test,tren,deca, etc, 29g for Human Chorionic Gonadotropin (HCG) will be fine since it not oil based. idk if this kinda helps

 

[kopikum]

I injected my test-e with 21g needle first two pins, it was not big deal but today I pinned with a 24g and it went through like it was nothing, I feelt absolutely nothing and had no problem to inject it

 

[SonOfZeu$]

I injected my test-e with 21g needle first two pins, it was not big deal but today I pinned with a 24g and it went through like it was nothing, I feelt absolutely nothing and had no problem to inject it

my buddy was doing it with a 18g, when i gave him a new 25g, guy didn't even feel it go in haha

 

[donjob]

i use 29g for my hcg. once i stick it through the rubber the Human Chorionic Gonadotropin (HCG) starts shooting into the syringe without me even pulling the plunger back. no need for a bigger needle to draw with. also the slin pins i got can't be switched out anyways.

 

[2rude4u]

Okay for the Test E I will use a 3cc syringe with a 18G x 1.5" needle to draw it out and then replace the needle with a 25G x 1" to pin it.

Does that seem right?

For the Human Chorionic Gonadotropin (HCG) I have .5 cc 29G x .5" syringe to pin it. Will I need a different size needle to draw the Human Chorionic Gonadotropin (HCG) out?

Thanks

Depends on where you pin. I use 23g-25g 1" on delts and 23g-25g 1.5" on glutes. Also the length to draw doesn't matter obviously. You're G2G on the Human Chorionic Gonadotropin (HCG) at 29g-30g .5" to draw and pin. Just draw and slam sub-q same syringe. If you have found one of these with removable pins it would be the first I have heard of.

 

[Emmerz24]

^^^^^ this right here is on the money

 

[Blueocean]

I use 1.5"- 23g to pin and 1" -20g to draw. you won't feel anything.

 

[jolter604]

I have always used 1 1/2 23 gauge 3 cc. I get 50 for 14.00

 

[cybrsage]

I use 27g to inject my test-cyp.

 

[Onk]

i draw 18g and pin 23g into every muscle group. If your pins are good and razor sharp you won't notice much if any difference

 

[PresTex]

Usually use 23g x 1" to draw and pin. But just tried using some 27g x .5" to pin and I gotta say its kinda nice. Absolutely painless, no leakage, and no sub-q lumps.