Anyone made liquid Anavar?

caladin

-Flesh Eater-
Anavar
Powder: per 1 gram of Oxandrolone
Produces: Highest concentration made - 20 mg/ml

Requirements:

1 gram of Oxandrolone powder
1 beaker suitable for holding the volume of liquids
9.8 ml of PEG 300 <98ml for 10Grams>
39.2 ml of 190 Proof Grain Alcohol <392ml for 10grams>


For all of the above conversions requiring PEG and 190 Proof Alcohol, use the following procedure:

place a sufficient amount of water in a pan and place on the stove
remove from heat when the water reaches boiling temperature
place the powder and the PEG in the beaker
immerse the beaker in the pan of water so that the water is level with the top of the contents of the beaker
gently swirl or stir the contents of the beaker until the solution is clear (reheat the water if necessary)
remove the beaker from the water
allow the PEG to cool down
slowly add the 190 Proof Alcohol to the mixture
gently stir until fully mixed
 
This is what i have: Anavar 50ml/20mg/ml
1gr. Powder
49mls/Peg 400 OR
9.8 Peg 400 and 39ml 190 proof grain alcohol
 
This is what i have: Anavar 50ml/20mg/ml
1gr. Powder
49mls/Peg 400 OR
9.8 Peg 400 and 39ml 190 proof grain alcohol


I copied and pasted mine. So I want to make sure I got the numbers right...

why peg400 vs peg 300?
 
Last edited:
Back
Top