Shoutout to Purity Source
- Thread starter 308power
- Start date
robbiek426
Uncle Z Representative
This source is good to go.
bigtimechief
New member
Ordered from these guys last week. Communication has been awesome and professional. I'll report back when i get the package, but i expect everything to be good. So far, these guys are gtg.
Mike Arnold
New member
I am sure you will be happy with the product quality.
True story: I have been using EP constantly for about 2 years now. I have never experienced any PIP from any EP product I have ever injected. This is how all injectable gear SHOULD be. If anyone tells you that a certain steroid is supposed to hurt or that there is no way around it, they are either lying or they don't know what they're talking about. In reality, ALL of the commonly produced steroids CAN be produced so they cause no PIP. The guys making the drugs simply have to know what they're doing on all fronts.
There was one time that I noticeda very slight bite upon injection of Mast prop, but it was very minor, did not result in any soreness afterward, and was a one time thing. After years of pain-free injects, I decided to try another brand last night. It was something i was sent free of charge and had lying around for a while, so i wanted to ue it up...and since it was something I normally would use anyway, I figured now would be the ideal time.
Well, as soon as I began injecting it it hurt. It has now been about 12 hours since I pinned and an area on my qaud about 6 inches in diameter is sore and hurts when I walk. This is a compound I have been using REGULARLY for the last 2 years without ZERO pip at all (EP version). I was immediately reminded that not everyoine knows what they're doing. I have not used much test prop from EP, but of the few vials I did use, I experienced an almost indiscernable amount of pain from a couple of them and absolutely none from another. The one's I did feel were so minor that it did not matter AT ALL...nothing close to the multi-day long soreness experienced with most of the other UGL test prop.
True story: I have been using EP constantly for about 2 years now. I have never experienced any PIP from any EP product I have ever injected. This is how all injectable gear SHOULD be. If anyone tells you that a certain steroid is supposed to hurt or that there is no way around it, they are either lying or they don't know what they're talking about. In reality, ALL of the commonly produced steroids CAN be produced so they cause no PIP. The guys making the drugs simply have to know what they're doing on all fronts.
There was one time that I noticeda very slight bite upon injection of Mast prop, but it was very minor, did not result in any soreness afterward, and was a one time thing. After years of pain-free injects, I decided to try another brand last night. It was something i was sent free of charge and had lying around for a while, so i wanted to ue it up...and since it was something I normally would use anyway, I figured now would be the ideal time.
Well, as soon as I began injecting it it hurt. It has now been about 12 hours since I pinned and an area on my qaud about 6 inches in diameter is sore and hurts when I walk. This is a compound I have been using REGULARLY for the last 2 years without ZERO pip at all (EP version). I was immediately reminded that not everyoine knows what they're doing. I have not used much test prop from EP, but of the few vials I did use, I experienced an almost indiscernable amount of pain from a couple of them and absolutely none from another. The one's I did feel were so minor that it did not matter AT ALL...nothing close to the multi-day long soreness experienced with most of the other UGL test prop.
Mike Arnold
New member
...and...they ship both INTL and DOM.
taefighter72
New member
I went to what I thought their site was. Looks very reasonable in price. My stuff has been crazy Higgs. Least it seems
Hogans hero
New member
Would y'all say these guys are better than pinnacle? If so why?
So happy to see some EP gear, I ran EP Sustanon and Tren E last year before the uncle went down. Great stuff, I still have a full 10ml Tren E that I will be using this time around. I hope the quality is no different because I loved what I ran last time. Can't wait to hear and see the results
Mike Arnold
New member
.............................................
I am not going to start the whole "we're better than them" type argument, as I consider it disrespectful. The only time I would come right out and say that a particular company isn't so good is if there are major, well documented problems with their gear and/or customer service.
With that said, I will tell you why I think PSL sells a great product.
For those who prefer to use products produced in a full-scale pharmacy from start to finish, PSL offers a wide variety of HG products are UGL prices! Good luck finding this anywhere else. This is only possible due to the unique associations and alliances which have been formed over the years.
These are just some of the reasons why I consider PSL to be a first-class operation. In my experiences with both PSL and the products they carry, I have had nothing but positive experiences with them and if the reviews all over the boards are any indication, I would say everyone else tends to feel the same way. While we cannot get into pricing details or shipping times in this thread per rules of the board, I can assure you that we are more than competitive for what you get and right on par with the rest of the UGLs when it comes to TOA's. When you compare what you see above with your curent UGL, ask yourself if you are getting the same return for your money. I genuinely hope you are, as there are several good UGL's out there I support, but if not, why should it remain that way?
Why PSL?
I am not going to start the whole "we're better than them" type argument, as I consider it disrespectful. The only time I would come right out and say that a particular company isn't so good is if there are major, well documented problems with their gear and/or customer service.
With that said, I will tell you why I think PSL sells a great product.
Product Quality
The raw materials used to make any steroid product are crucial to its success. Nothing is more important than the quality of the raws & carriers when it comes to determining product quality. Unfortunately, many UGL's use polluted, low quality raws from cheap sources...and while they may (or may not) contain the primary ingredient, the likelihood of ending up with raws which are pure and properly dosed is low. More so, trying to maintain any type of consistency or product standard is almost impossible, as both purity and potency can vary considerably from one batch to the next, depending on the manufacturer which produced them.
The premier UGL line sold by PSL, EuroPharm sources its raws & oils directly from foreign pharmacies. I don't think I need to explain the difference in reliability when sourcing raws from pharmacies compared to chinese manufacuring plants.
The raw materials used to make any steroid product are crucial to its success. Nothing is more important than the quality of the raws & carriers when it comes to determining product quality. Unfortunately, many UGL's use polluted, low quality raws from cheap sources...and while they may (or may not) contain the primary ingredient, the likelihood of ending up with raws which are pure and properly dosed is low. More so, trying to maintain any type of consistency or product standard is almost impossible, as both purity and potency can vary considerably from one batch to the next, depending on the manufacturer which produced them.
The premier UGL line sold by PSL, EuroPharm sources its raws & oils directly from foreign pharmacies. I don't think I need to explain the difference in reliability when sourcing raws from pharmacies compared to chinese manufacuring plants.
Professional Operation
These top-end raw materials are then sent to another high-tech facility, where they are assembled by knowledgable and competent staff with significant experience in this industry. Considerable expense is incured during this process. Signs of this extensive opertation are found in the products themselves. For example, you will that most of the smaller UGL's...the ones who usually produce their products at home...almost always sell their oral products in capsule form, not pills. This is because a pill press is expensive, especially high quality versions, such as those used by pharmaceutical companies. Pills are the preferred form of delivery with oral consumption, as it allows for easier dosing (you can break pills in half, quarter them, etc) and greater durability.
A step up from capsules would be a low-quality pill press. These pills made with these machines very often produce pills which lack density, causing them to fall apart very easily. Have you ever received a bottle of pills in the mail only to see a bunch of white powder sitting in the bottom of the bottle, along with pills which you could crumble simply by squishing them inbetween your fingers? Lastly, some UGL's, such as PSL/EP use a pharmacy quality pill press, which produces a very hard, dense, evenly shaped tablet. These tablets will maintain their integrity during transport, handling, and storage...and are perfect for tailored dosing, as they are easily broken up into equally divided doses without crumbling into small fragments and/or powder.
These top-end raw materials are then sent to another high-tech facility, where they are assembled by knowledgable and competent staff with significant experience in this industry. Considerable expense is incured during this process. Signs of this extensive opertation are found in the products themselves. For example, you will that most of the smaller UGL's...the ones who usually produce their products at home...almost always sell their oral products in capsule form, not pills. This is because a pill press is expensive, especially high quality versions, such as those used by pharmaceutical companies. Pills are the preferred form of delivery with oral consumption, as it allows for easier dosing (you can break pills in half, quarter them, etc) and greater durability.
A step up from capsules would be a low-quality pill press. These pills made with these machines very often produce pills which lack density, causing them to fall apart very easily. Have you ever received a bottle of pills in the mail only to see a bunch of white powder sitting in the bottom of the bottle, along with pills which you could crumble simply by squishing them inbetween your fingers? Lastly, some UGL's, such as PSL/EP use a pharmacy quality pill press, which produces a very hard, dense, evenly shaped tablet. These tablets will maintain their integrity during transport, handling, and storage...and are perfect for tailored dosing, as they are easily broken up into equally divided doses without crumbling into small fragments and/or powder.
Human-Grade Products
For those who prefer to use products produced in a full-scale pharmacy from start to finish, PSL offers a wide variety of HG products are UGL prices! Good luck finding this anywhere else. This is only possible due to the unique associations and alliances which have been formed over the years.
Proper Production Technique.
Unfortunately, it is extremely common these days for many UGL products to cause what we have come to call "post-injection pain" or P.I.P, for short. Virtually non-existent in the pharmaceutical industry, PIP has become an every day ocurrence with UGL products, causing users to experience anywhere from minor to severe pain when using these products. Annoying, to say the least, PIP is a result of poor manufacuring practices..plain and simple. Even products such as test prop, when made under U.S. pharmaceutical standards, is 100% pain-free...every time.
The primary reason UGL products cause pip is due to an overabundance of alcohol, which many UGL's add to their oils in order to compensate for inadequate sterilization practices. The bottom line is that it requires a lot of costly equipment and the right facilaties to ensure that a product is produced under completely sterile conditions. When production at this level is not possible, the only alternative is to flood the product with alcohol as an insurance policy againts possible mistakes. Usually, this is sufficient to ward off any serious infections, but not always and besides, the user now has to deal with chronic pain and/or irritation because of it.
EP has the finances and resources to produce their products properly and when it comes to the pharm-grade selections, they speak for themselves. You will not find any alcohol-loaded injectables in the EP line. Injections are pain-free. In my own experience, aside from 1-2 very mild occurences, every single vial of EP I have used over the last 2 years (at least 100 vials) has been a complete pleasure to use. No pain at all. As I stated above, I was harshly reminded just last night that not all products are created the same...and my left qaud testifies with me.
Superior Carriers
Advancements in the industry have lead to notable improvements in many UGL products. This is especially apparent in terms of oil viscosity. Today, many UGL's use relatively thin oils in their injectable products. This allows the product to be administered using much smaller needles. In the case of PSL, our oils can be admninistered using needles as small as slin pins. Not only does this minimize discomfort during the injection process, but it significantly reduces scar tissue build-up, as well.
Extensive Product Selection
PSL currently offers are impressive array of PED products to choose from, along with future plans for expansion of the line. Some of the products being considered for development are currently non-existent...and would surely generate quite a bit of excitment at their release.
Random Internal Product Testing
PSL regularly conducts random public product testing via user bloodwork, giving the cutomer the assurance that they get what they pay for. In an industry of uncertainty and self-governed ethics, lab work remains the gold standard of product assurance.
Product Appearance
Although purely a superficial aspect of any UGL operation, the time and effort invested in making sure that one's product looks the part is indicative of how the company may handle with other, more important aspects of the business. This attention to detail directly influences a customer's perception of the product. Even the best quality gear falls short in the eyes of consumers when it looks like shit. To this end, all PSL products showcase a clean and professional appearance, while being designed to minimize the possibility of detection during shipping.
Packaging
Proper packaging is an important part of any UGL. When ordering Dom., proper packaging increases the odds that the products paid for arrive to the customer in the condition expected. While broken or damaged product can happen as a result of poor postal worker handling, proper packaging greatly reduces the possibility of this occurring. In my personal experience, out of the 400+ amps I have recieved from PSL in the last 6 months, all arrived in perfect condition. With amps being one of the most delicate items to ship, a 100% success rate is proof-positive of PSL's excellent packaging.
When ordering INTL. proper packaging not only ensures product stability, but reduces the probability of detection.
Unfortunately, it is extremely common these days for many UGL products to cause what we have come to call "post-injection pain" or P.I.P, for short. Virtually non-existent in the pharmaceutical industry, PIP has become an every day ocurrence with UGL products, causing users to experience anywhere from minor to severe pain when using these products. Annoying, to say the least, PIP is a result of poor manufacuring practices..plain and simple. Even products such as test prop, when made under U.S. pharmaceutical standards, is 100% pain-free...every time.
The primary reason UGL products cause pip is due to an overabundance of alcohol, which many UGL's add to their oils in order to compensate for inadequate sterilization practices. The bottom line is that it requires a lot of costly equipment and the right facilaties to ensure that a product is produced under completely sterile conditions. When production at this level is not possible, the only alternative is to flood the product with alcohol as an insurance policy againts possible mistakes. Usually, this is sufficient to ward off any serious infections, but not always and besides, the user now has to deal with chronic pain and/or irritation because of it.
EP has the finances and resources to produce their products properly and when it comes to the pharm-grade selections, they speak for themselves. You will not find any alcohol-loaded injectables in the EP line. Injections are pain-free. In my own experience, aside from 1-2 very mild occurences, every single vial of EP I have used over the last 2 years (at least 100 vials) has been a complete pleasure to use. No pain at all. As I stated above, I was harshly reminded just last night that not all products are created the same...and my left qaud testifies with me.
Superior Carriers
Advancements in the industry have lead to notable improvements in many UGL products. This is especially apparent in terms of oil viscosity. Today, many UGL's use relatively thin oils in their injectable products. This allows the product to be administered using much smaller needles. In the case of PSL, our oils can be admninistered using needles as small as slin pins. Not only does this minimize discomfort during the injection process, but it significantly reduces scar tissue build-up, as well.
Extensive Product Selection
PSL currently offers are impressive array of PED products to choose from, along with future plans for expansion of the line. Some of the products being considered for development are currently non-existent...and would surely generate quite a bit of excitment at their release.
Random Internal Product Testing
PSL regularly conducts random public product testing via user bloodwork, giving the cutomer the assurance that they get what they pay for. In an industry of uncertainty and self-governed ethics, lab work remains the gold standard of product assurance.
Product Appearance
Although purely a superficial aspect of any UGL operation, the time and effort invested in making sure that one's product looks the part is indicative of how the company may handle with other, more important aspects of the business. This attention to detail directly influences a customer's perception of the product. Even the best quality gear falls short in the eyes of consumers when it looks like shit. To this end, all PSL products showcase a clean and professional appearance, while being designed to minimize the possibility of detection during shipping.
Packaging
Proper packaging is an important part of any UGL. When ordering Dom., proper packaging increases the odds that the products paid for arrive to the customer in the condition expected. While broken or damaged product can happen as a result of poor postal worker handling, proper packaging greatly reduces the possibility of this occurring. In my personal experience, out of the 400+ amps I have recieved from PSL in the last 6 months, all arrived in perfect condition. With amps being one of the most delicate items to ship, a 100% success rate is proof-positive of PSL's excellent packaging.
When ordering INTL. proper packaging not only ensures product stability, but reduces the probability of detection.
These are just some of the reasons why I consider PSL to be a first-class operation. In my experiences with both PSL and the products they carry, I have had nothing but positive experiences with them and if the reviews all over the boards are any indication, I would say everyone else tends to feel the same way. While we cannot get into pricing details or shipping times in this thread per rules of the board, I can assure you that we are more than competitive for what you get and right on par with the rest of the UGLs when it comes to TOA's. When you compare what you see above with your curent UGL, ask yourself if you are getting the same return for your money. I genuinely hope you are, as there are several good UGL's out there I support, but if not, why should it remain that way?
Last edited:
Hogans hero
New member
Thanks for pm mike. I tried to respond but not enough posts yet
Armed and dangerous
New member
Always love more options! Any "big dogs" been using these guys? What do you think? Just trying to get more input. No disrespect or the big dog comment just wondering who's tried them.
Nosy Parker
New member
Interesting, I would be interested in getting some lab analysis done. Nowadays with how strictly they monitor production from pharmaceutical companies it's next to impossible to find legitimate pharmaceutical products.
Mike Arnold
New member
The difficulty in sourcing pharm-grade products is almost wholly dependent on WHAT you want to obtain? Finding U.S. pharm-grade AAS for sale at a UGL? Not gonna happen. The industry is very tightly regulated with no mass-scale AAS diversion going on anymore. Now, if you are taklking about eastern European, Indian, or Aaian Pharms....it is a completely different story. Those products are everywhere...and often times they are manufacurded specifically for large-scale diversion. Why do you think some of these foreign pharms make and sell more steroids than U.S pharmacies...and why do you think they sell a larger variety of AAS?
Think about it. Do you think patient need in those countries, some of them relatively small countries, have a larger need for steroids than the U.S. does? Nope. They make & sell so many different steroids because it is an easy way to increase profits. U.S pharms already make a killing selling all their other patented drugs...and with the legal penalties now being so harsh if caught diverting, there is no incentive for a U.S pharm to do so. However, it is not so in some other countries...and selling off large amounts of AAS via blackmarket diversion is a great way to make extra cash.
Mike Arnold
New member
I will not say one company is better than another. It is disrespectful. All I will do is post why I think PSl runs a first-class operation. I believe I have provided enough facts about the PSL business to help you make any comparison you want. Besides, I don't know who AML is anyway, so I couldn't say even if I wanted to.
Mad- scientist
Moderator
All your posts always greatly impress me and show a lot of class and intelligence mike.
Mike Arnold
New member
Lots of mods and Super mods, as well as several admins on Big name boards have voiced their support for their products. A friend of mine, Heavy Iron (Super mod and admin on multiple boards), has spoken highly of theur products. S2H, a Super Mod on Rx and several other boards (as well as coach), says the same. Bryan Hildrebarnd, editor in chief over at RX, also speaks highy of them...as do many, many more guys who have a good deal of respect and influence in the BB'ing community. I could probably list at least 8-10 more mods at various boards who hold the same opinion.