Drawing Needle ?s

[Junior Builder]

I was wondering if im going to be drawing from an amp is it important to change the needle after i draw ? Is an 18ga needle important to use to draw or can i use 22 ? Thanx Guys

 

[Brock Landers]

I use an 18 gauge needle to draw, works fine

 

[J steel]

from amps, 18gauge is fine. but when drawing from larger viles with a rubber top, i use 20guage. the 18's can tear pretty big chunks out of the rubber

and i believed you asked if its important to change the needle after drawing.............well, if your using an 18guage you better damn sure take that oil pipe off and put on a 23guage or smaller! way too big to shoot yourself with!

 

[StoneColdNTO]

I always use an 18g to draw up any oils. You could get by with a 22g, but's it's a slooowww process, plus you really should change pins anyways.

 

[WI]

I was wondering if im going to be drawing from an amp is it important to change the needle after i draw ? Is an 18ga needle important to use to draw or can i use 22 ? Thanx Guys

If your drawing from an amp then go ahead and use the 18g, just a speedier process and as for changing the needle........I sure hope so otherwise you will be hurting like a mofo! Switch it to a 23g for glutes or 25g for sites.

 

[Junior Builder]

Thanx, I was just unsure wether if i draw with the 22 gauge needle and then use it the same 22 to inject right after?

 

[buffaznguy]

use a 20 gauge for drawing vials..i had small chunks in my vials with 18 gaug

 

[rpwhit777]

Yeh just becareful with the larger gauge pins for sucking up the oil as I have had chunks of rubber in my syringue, no risks for amps. And it would be a good idea to switch pins before you inject. DULL PINS>>>>>>>OUCH!!!!

 

[TxLonghorn]

use a 20 gauge for drawing vials..i had small chunks in my vials with 18 gaug

 

[DTOX]

I'm the same boat dude.

I just use the same needle that I draw with to inject (22g).

Sometime I'd like to change the needle out just to see if I notice any difference (like some bros recommend) but I'm too lazy.