trenbolone question
- Thread starter fedmax123
- Start date
2 gram cart to crystal clen conversion.
I finaplix-h cart (2 grams of Tren); 1 bottle of methyl alcohol
(MA), 1 gallon distilled water, 2 large containers (at least 200ml),
funnel, coffee filters (I use micro filter paper in place of coffee filters),
one 10ml unsealed vial, one 20ml presealed multi-use vial, a few 18 g needles,
some 22-25 g needles to use as ***8220;vent needles***8221;, 1 (I buy more just to be safe)
Whatmanfilter.
I finaplix-h cart (2 grams of Tren); 1 bottle of methyl alcohol
(MA), 1 gallon distilled water, 2 large containers (at least 200ml),
funnel, coffee filters (I use micro filter paper in place of coffee filters),
one 10ml unsealed vial, one 20ml presealed multi-use vial, a few 18 g needles,
some 22-25 g needles to use as ***8220;vent needles***8221;, 1 (I buy more just to be safe)
Whatmanfilter.
Instructions to Tren Ace for 2gram cart.
You will need the following:
1 carts finaplix which equals 2 grams tren.
.4 ml/BA
3.6 ml/BB
15ml/ Sterile oil (I always use Grapeseed Oil, but walnut or sesame will work too)
2 sterile vials or beakers at least 20ml in volume
1 small funnel and coffee filters or micro filter paper
1 20 or 40ml sterile sealed multi-use vial
2-3 18 guage needles
2-3 21 guage needles
2 10ml syringes
several 3ml syringes, just to be safe
.22um Whatman filter (you can also use a .45um, I usually filter 2X-once with a .22
then again with a .45um)
I use a paperclip that I straighten out and clean with rubbing alcohol. Push the pellets from the cart into your 1st sterile container.
Add your BA and BB, seal and let stand for 3-4 hours. Swirl the mixture every 30 min. Add 12 ml sterile oil. (You CAN use oil from the grocery store if you cannot get your hands on sterile oil, but I don***8217;t suggest it.) Let stand for approx. 24 hours or until the pellets are dissolved.
Take 18 guage needle and 10ml syringe. The glues and binders should have settled to the bottom of the vial. Draw up all the ***8220;clear***8221; oil standing on top of the crap in the bottom. Transfer into your 2nd sterile container by drawing into syringe then filtering through your .22um Whatman filter. When done purge the Whatman with 1 ml sterile oil.
Add 1 ml sterile oil to the ***8220;gunk***8221; remaining in the bottom and filter through coffee filter and funnel into 2nd container. After all oil has filtered through and you give the coffee filter a good squeeze, take another 18 guage / 10 ml syringe and draw and filter through your .45um Whatman into sealed sterile multi-use vial. Use one of your 21 guage needles to allow venting. Use your last ml sterile oil to purge Whatman filter.
Once all is in the multi-use vial you should keep your 21 guage needle inserted (also for venting) and place into the oven set at 220 degrees for 30 min. DO NOT LET THE NEEDLE TOUCH YOUR GEAR OR IT WILL LEAK OUT OF THE NEEDLE!!
These are not the most clear of directions but the following links are the two different methods I***8217;ve combined and pictures are included. Remember, if in any directions you follow, magic solution is listed, that is simply your solvents (BA and BB).
I want to thank Basskiller for all he does to help educate all of us interested in making our own Tren. While on the site I suggest you look into the Crystal method as well.
I hope is a help to someone interested in making your own Trenbolone Ace from a Finaplix cart(s).
You will need the following:
1 carts finaplix which equals 2 grams tren.
.4 ml/BA
3.6 ml/BB
15ml/ Sterile oil (I always use Grapeseed Oil, but walnut or sesame will work too)
2 sterile vials or beakers at least 20ml in volume
1 small funnel and coffee filters or micro filter paper
1 20 or 40ml sterile sealed multi-use vial
2-3 18 guage needles
2-3 21 guage needles
2 10ml syringes
several 3ml syringes, just to be safe
.22um Whatman filter (you can also use a .45um, I usually filter 2X-once with a .22
then again with a .45um)
I use a paperclip that I straighten out and clean with rubbing alcohol. Push the pellets from the cart into your 1st sterile container.
Add your BA and BB, seal and let stand for 3-4 hours. Swirl the mixture every 30 min. Add 12 ml sterile oil. (You CAN use oil from the grocery store if you cannot get your hands on sterile oil, but I don***8217;t suggest it.) Let stand for approx. 24 hours or until the pellets are dissolved.
Take 18 guage needle and 10ml syringe. The glues and binders should have settled to the bottom of the vial. Draw up all the ***8220;clear***8221; oil standing on top of the crap in the bottom. Transfer into your 2nd sterile container by drawing into syringe then filtering through your .22um Whatman filter. When done purge the Whatman with 1 ml sterile oil.
Add 1 ml sterile oil to the ***8220;gunk***8221; remaining in the bottom and filter through coffee filter and funnel into 2nd container. After all oil has filtered through and you give the coffee filter a good squeeze, take another 18 guage / 10 ml syringe and draw and filter through your .45um Whatman into sealed sterile multi-use vial. Use one of your 21 guage needles to allow venting. Use your last ml sterile oil to purge Whatman filter.
Once all is in the multi-use vial you should keep your 21 guage needle inserted (also for venting) and place into the oven set at 220 degrees for 30 min. DO NOT LET THE NEEDLE TOUCH YOUR GEAR OR IT WILL LEAK OUT OF THE NEEDLE!!
These are not the most clear of directions but the following links are the two different methods I***8217;ve combined and pictures are included. Remember, if in any directions you follow, magic solution is listed, that is simply your solvents (BA and BB).
I want to thank Basskiller for all he does to help educate all of us interested in making our own Tren. While on the site I suggest you look into the Crystal method as well.
I hope is a help to someone interested in making your own Trenbolone Ace from a Finaplix cart(s).
No i Have never run karts. I always get Tren A powder and do mine that way.
I use steroid powder calculator to figure out what he was doing.
its 20ml of oil total, he held back 5ml to clean his filters
This will be 100mg per ML conversion give or take.
If you want .75 you will have to up the oil to about 27ML
I suggest you follow the recipe 2-3 times exactly as stated, then start playing with the numbers. You can just do .75 of a ml of product when its done.
Good luck and keep the questions coming.
I use steroid powder calculator to figure out what he was doing.
its 20ml of oil total, he held back 5ml to clean his filters
This will be 100mg per ML conversion give or take.
If you want .75 you will have to up the oil to about 27ML
I suggest you follow the recipe 2-3 times exactly as stated, then start playing with the numbers. You can just do .75 of a ml of product when its done.
Good luck and keep the questions coming.
nop..
27.7ml total oil
75mg dose
.75 powder weight
.02 BA
.18 BB
Basskiller
19.86 oil (hold back some for filter)
2G powder
.53ml BA
4.81ml BB