A 25G1 needle on a thigh?

[Footballstar74]

Can I use that needle size on a thigh?

 

[Flex it]

What are you running through it?

 

[StoneColdNTO]

Sure, 1" is fine for length..........25g, depends on how thick the oil you're injecting is.

 

[Vennom96]

Thats what I use for my thighs. I use that for all my injections actually except recently I ordered some 23 1.5 for my ass.

 

[drk_diggler]

Whats your bf%?

 

[Eze]

I used a 25g 1" 2 days ago in my quad:

1CC Test Enan
1.5 CC EQ

HOMEBREW!!!


Just heat up the oil before you draw it in the syringe and it should work fine!!!

 

[Footballstar74]

Thanx for the help. How can i heat up the oil? Do I have to put it under hot water coming from my sink or do I put it in boiled water?

 

[Footballstar74]

Sure, 1" is fine for length..........25g, depends on how thick the oil you're injecting is.

Its Omnadren 250 and the oil looks thick.

 

[prbaflexed]

i use 25 gauge for everything. t-400, super test 250, deca 200, etc...
before i inject i set it in a glass of water that i have boiled in the microwave for a minute. heats the oil enough.

 

[Footballstar74]

Jus finished the shot. Everyhting went smooth. Hope its not gonna be as sore as my delt was on monday.

 

[MotownMuscle]

Using a 1 inch 25g is ideal for quads.

 

[bpittari1]

I agree and do the same as Vennom96. I use mainly all 25g 5/8", except for my glutes.

 

[phattysiz]

Thanx for the help. How can i heat up the oil? Do I have to put it under hot water coming from my sink or do I put it in boiled water?

Either of those options will work. I would use caution as to how hot you get it before shooting though. I can't imagine shooting something @ 212F and not feeling that.

 

[Vigilance]

I use 23g 1" in the thighs. I've also used 1.5" without any problems.

 

[rjx]

1" 25g are great for thighs

 

[Ducati32]

23 and 25 both work fine

 

[Eze]

Boil a pot of water
Take the pot off the stove
place the vial in the water for a few mins
Swab the top of the vial and your injection site
Draw out gear
Shoot
DONE!

The hot water makes the oil very thin and should pass through a 25g no problem!

 

[reallittleguy]

I used a 25 gauge the first time two days ago and loved it. I have been using a 22 gauge but not again.

 

[DADAWG]

Boil a pot of water
Take the pot off the stove
place the vial in the water for a few mins
Swab the top of the vial and your injection site
Draw out gear
Shoot
DONE!

The hot water makes the oil very thin and should pass through a 25g no problem!

i just run the barrel of the syringe under hot water at the faucet for a 100 count and then change to my fresh pin and inject