Anyone know how to make sterile oil ?

[darkwing86]

Hey guys , so i need to know how to make some sterile oil to dillute test i have. The pip from it is ridiculous and lasts for days

I know u can use a whatman filter and filter store bought grapeseed oil but i cant get ahold of whatman filters .
Does anyone know a way this can be done by simply heating the oil or with BA or BB ( Benzyl alcohol and Benzyl Benzoate ) ? i have both

 

[PapaNoel]

I have no experience in this field but what popped up in my brain instantly...
Buy sterile medical oil?

Interesting subject but im to tired to research. Hopefully someone can offer more help in what you actually asked for

 

[scorob777]

You can both heat it up, and run it through a 22 micron syringe filter.

 

[darkwing86]

You can both heat it up, and run it through a 22 micron syringe filter.

i dont have the filter however . Are you implying that heating up is enough to sterilize it ? mind elaborating ?

 

[scorob777]

lookup "temperature to sterilize bacteria" in google. It gives you a figure. Then look up your compound and try to find where it starts to degrade, keep it below that.

 

[darkwing86]

lookup "temperature to sterilize bacteria" in google. It gives you a figure. Then look up your compound and try to find where it starts to degrade, keep it below that.

Appreciate the help man . thank you . So you think that possibly putting say grapeseed oil in the oven around 180 for 1 hour is good ? Then just bottle it ? no BA or BB ?

 

[PapaNoel]

i dont have the filter however . Are you implying that heating up is enough to sterilize it ? mind elaborating ?

Can be order at amazon or similar, just search micron syinge filter leur lock
Costs nothing.

 

[Bigbaba]

Yea, the micron filter is easy to buy online.

 

[jp4355]

Go to Med-Lab Supply.
They have Pre-Filtered Carrier Oils for sale from 50 Ml to 5 Gallons.
Then you don't need to Filter it, just add what you need.............................. JP

 

[Dreaded Pirate Roberts]

First heat it up so it will be more viscus. stack .45 filter to a .22 filter so that it first passed threw the .45. If you don't use a .45 first you will clog the .22 and be stuck. The .22 is the standard for lab sterility. Filter in to a sealed sterile vial. then bake it in the over at 350 degrees for 15 minutes. Make sure you use a syringe to vent the vial while it bakes but make sure the needle does not reach into the oil or oil will bubble out of the top as it bakes.

 

[dennis john]

dont have the filter however . Are you implying that heating up is enough to sterilize it ? mind elaborating ?

 

[bigandgrowing]

you wont get any answers on OP
we all moved to evolutionary.org

check it

https://********************/forums/