Help Primo Problem

[carnivor32]

What do you guys think. I got some stealth primo, transfered to vials that had steril water in them (of course took the water out before) used steril techniques. a few weeks later i saw that the color of the oil went from light yellow to a merky white, and had this filmy thick formation on the bottom (thought it was bacteria). I then orderd .2micron whatmann filtered and baked the 2 10 ml vials for 30min at 300 degrees. after baking both vials were nice and clear with the slight yellow color .

But today I noticed that one of the vials is murky again. Originally both were murky.

WTF?

 

[GymLift]

My guess: moisture.

 

[DocJ]

My guess: moisture.

Good guess, I'd agree.

 

[carnivor32]

So you think it would be ok to inject?

Maybe .25cc SubQ to see if an infection occurs. this way i can be easy to treat

 

[BigRonWannabee]

It should be fine, its more than likely just sterile moisture.

 

[DocJ]

I had this happen with a batch of TrenA awhile ago, still used it, no problems.

 

[carnivor32]

thanx for the input, I'll let you know how it goes in 3 weeks.