Measuring out 100mg/cyp in a 3ml needle...

[LongBeach_Patriot]

Hey. I am on TRT with a dosing schedule of 100/mg Cyp E5D. I've been on TRT for about 6 months now. Just started E5D 2 weeks ago. Before that I was on E14D, then dropped to E10D as per my Endochrinologist.

I'm finding it difficult to measure out exactly 100ml. It's always very close to 100 but when measuring out and injecting theres always a little less or more depending on how much cyp comes out when pushing the excess air out. Its only little droplets but me being anal, I like exact measurements.

Just wanted to know if its normal to not be exact with the dose? Im sure its only a difference of +- 5mg or so but I still wanted to get some input from more experienced guys on here.

Thanks as always,

MiKe

 

[Mprtz]

If you want to be more exact you can get 1cc syringes that fit the same needles. Or use insulin syringes if you're lean enough.

 

[LongBeach_Patriot]

If you want to be more exact you can get 1cc syringes that fit the same needles. Or use insulin syringes if you're lean enough.

I was thinking Slin needles but I think the Test is too thick. I use a 25g needle now and i gotta press considerable hard, which i dont mind because i like the slow administering into the muscle. I havent been able to fine 1cc syringes. Not on RUI at least, haha.

Getting bloodwork done next monday on the trough day. Wanted to give my body a few weeks of E5D before getting Bloodwork.

Thanks man.

 

[Mprtz]

We're talking about pharma test cyp? I don't have any problems loading or injecting a 29g, and I don't backload either. Just takes a little patience.
I ordered a bunch of 1cc barrels from eastcoastmedicalsupply.

 

[Metalman69]

I was thinking Slin needles but I think the Test is too thick. I use a 25g needle now and i gotta press considerable hard, which i dont mind because i like the slow administering into the muscle. I havent been able to fine 1cc syringes. Not on RUI at least, haha.

Getting bloodwork done next monday on the trough day. Wanted to give my body a few weeks of E5D before getting Bloodwork.

Thanks man.

Are you warming up your vial before drawing and injecting? If not, it thins out the liquid and makes the whole process smoother.
I think you'll be happy on E5D schedule. I like E6D myself.

 

[LongBeach_Patriot]

We're talking about pharma test cyp? I don't have any problems loading or injecting a 29g, and I don't backload either. Just takes a little patience.
I ordered a bunch of 1cc barrels from eastcoastmedicalsupply.

Ya pharma cyp. Watson 200/1ml. I may need to get some UG cyp because im taking 25mg more every 10 days so im going to run out a little faster than the doc prescribed. Cool I see the 1ml's on that site, thanks. The tips are removable right?

 

[LongBeach_Patriot]

Are you warming up your vial before drawing and injecting? If not, it thins out the liquid and makes the whole process smoother.
I think you'll be happy on E5D schedule. I like E6D myself.

not really, shake a little and hold in my hand but not intentionally warming it. Will try that. Sounds practical.

 

[Metalman69]

not really, shake a little and hold in my hand but not intentionally warming it. Will try that. Sounds practical.

I heat up a mug of water and put the vial in a baggie and just let it sit in there a couple minutes, really thins out the oil.
Also, have you considered taking a 25mg less (instead of more?) so maybe the doc will raise your dosage and you don't need to go UGL?

 

[Mprtz]

Ya pharma cyp. Watson 200/1ml. I may need to get some UG cyp because im taking 25mg more every 10 days so im going to run out a little faster than the doc prescribed. Cool I see the 1ml's on that site, thanks. The tips are removable right?

Yeah, they are luer lock. I put about $100 of stuff in my cart with that site, then saw that shipping was almost $50. Orders over $200 have free shipping, so I doubled my order. That was with one of their 20% or 30% off sales. Let's just say I have an ample supply

 

[LittleJohnny]

When you draw in the test, draw back until your plunger is at about 0.7 to 0.8 ml. At this point you'll have a little more than 0.5 ml of test, plus some air in the syringe. Then push the air and excess test in the syringe back into the bottle until your plunger is at 0.5 ml. Be sure to keep the needle pointed up so the air goes out first. You'll have exactly 0.5 ml every time.

 

[STAUNCHED427]

I used to try do it with 3cc barrells so I got ahold of 1cc barrels, they are long and you can easily measure .05ml increments. Makes getting those .5ml shots easy as shit. IME they are also easier to inject in terms of pushing the oil in.

Would be nice if I could get some 2cc barrels as I am doing 1.3ml shots now with 3ml barrels, thinking of just drawing out my .8ml deca with the 3cc and then backloading .5ml test into the 3cc. It's the test I want to be exact on the mark with.

 

[LongBeach_Patriot]

I used to try do it with 3cc barrells so I got ahold of 1cc barrels, they are long and you can easily measure .05ml increments. Makes getting those .5ml shots easy as shit. IME they are also easier to inject in terms of pushing the oil in.

Would be nice if I could get some 2cc barrels as I am doing 1.3ml shots now with 3ml barrels, thinking of just drawing out my .8ml deca with the 3cc and then backloading .5ml test into the 3cc. It's the test I want to be exact on the mark with.

2ml Syringe | eBay From ebay...and China lol, not sure if thats something to be wary about but there ya go.

 

[Mprtz]

2ml Syringe | eBay From ebay...and China lol, not sure if thats something to be wary about but there ya go.

Industrial syringe, not sterile!

 

[IMT staff]

yikes!

 

[LongBeach_Patriot]

Just picked up 100 1cc syringes without needle with luer lock from East Coast Medical. Yea shipping is a bitchhh but 100 will last me 500 days lol, I can deal with 10$ shipping, despite the rapage.