Hi, i am coming to the end of a 12 week stack and i have all my PCT gear ready however i am still a little bit confused with the use of HGC.
My course will finish with a final week of 500mg test-E (2x250mg pw) and 150mg Tren-A (75mg x 3pw) + 50mg ed Var.
I understand that because of the Test-E i should wait approx 14 days for levels to drop into the acceptable natural level before commencing PCT so as to prevent any further suppression once the pct is finished.
However, with regard to the HGC. My balls have shrunk quite a bit, one slightly more than the other and some mornings they seem to have regained a slight bit of size but others there just Small end of! Now i have read / been given two lots of conflicting advice with the HGC.
The first advice said too start the HGC 4 weeks prior to finishing the course at a dose of 1250iu pw spread over 3 jabs. This should mean the HGC will run out (5000iu) on the same day as the last Test-E is jab. Then i can commence PCT 14 days later with Larger nuts already in play. This seems to make sense as the HGC will get them upto size and then the PCT will help to maintain it while the natural LH takes over. the main theory behind this is to catch the balls before they shut down completely and give them a 'Jump start' for the last bit of the cycle. Afaik, its much harder to kick start a fully shut down system than it is when there still slightly alive.
However i have also been told not to start HGC until i have finished the cycle completely and then proceed with the same dose. This for me will mean my nuts will be in complete shut down and i will have to wait 4 weeks after the end of the cycle for the HGC to finish before i can start my PCT. -This doesn't make much sense to me.
So what should it be ? Im thinking of the former tbh.
Oh, btw also having never done a HGC injection before, can i stick it anywhere in my stomach fat? do i have to aspirate like on an IM? And with regard to mixing up the solution, i have 5000iu powder in an ampoule and another 1ml amp full of the water. there is 5000iu total solution. I'm guessing i have to mix them then -as i cannot re-seal an AMP, i have to fill up each syringe straight away? So, how much do i put in each syringe? -im using 1ml insulin syringes. and do i keep them in the fridge?
Many thanks for the help
My course will finish with a final week of 500mg test-E (2x250mg pw) and 150mg Tren-A (75mg x 3pw) + 50mg ed Var.
I understand that because of the Test-E i should wait approx 14 days for levels to drop into the acceptable natural level before commencing PCT so as to prevent any further suppression once the pct is finished.
However, with regard to the HGC. My balls have shrunk quite a bit, one slightly more than the other and some mornings they seem to have regained a slight bit of size but others there just Small end of! Now i have read / been given two lots of conflicting advice with the HGC.
The first advice said too start the HGC 4 weeks prior to finishing the course at a dose of 1250iu pw spread over 3 jabs. This should mean the HGC will run out (5000iu) on the same day as the last Test-E is jab. Then i can commence PCT 14 days later with Larger nuts already in play. This seems to make sense as the HGC will get them upto size and then the PCT will help to maintain it while the natural LH takes over. the main theory behind this is to catch the balls before they shut down completely and give them a 'Jump start' for the last bit of the cycle. Afaik, its much harder to kick start a fully shut down system than it is when there still slightly alive.
However i have also been told not to start HGC until i have finished the cycle completely and then proceed with the same dose. This for me will mean my nuts will be in complete shut down and i will have to wait 4 weeks after the end of the cycle for the HGC to finish before i can start my PCT. -This doesn't make much sense to me.
So what should it be ? Im thinking of the former tbh.
Oh, btw also having never done a HGC injection before, can i stick it anywhere in my stomach fat? do i have to aspirate like on an IM? And with regard to mixing up the solution, i have 5000iu powder in an ampoule and another 1ml amp full of the water. there is 5000iu total solution. I'm guessing i have to mix them then -as i cannot re-seal an AMP, i have to fill up each syringe straight away? So, how much do i put in each syringe? -im using 1ml insulin syringes. and do i keep them in the fridge?
Many thanks for the help
