Swirls in TestE...odd....

[DewLover]

Any thought to this.... this is the 1st time this has happened to me...

Started a batch of 150ml TestE so I can run through the Millipore filter. Everything is checking out and then I went to reheat the oil after it sat overnight covered up and secured, I moved the glass stirrod to get it moving and it had swirls for some reason. So I simply reheat it up and swirls when I stir become more noticeable...this didnt occur when its cold, only whens its warm. This was made at 2%BA and 15% BB, I know BB isnt necessary for TestE but I always do for peace of mind. Well I decided to go up to 20%BB and I adjusted the volumes...170ml since the I cant decrease the ML of oil in there. But added the necessary volumes and recooked it down. Well, there are still swirls when I stir when its warm and now I have let it set for a bit to room temp and there are still faint swirls. I have reheated it several times and there are still swirls when I move the rod....

Never had this happen with TestE...any thoughts...?

 

[DewLover]

Tried taking a photo but the camera will not focus quick enough to get one

 

[J-Radical]

Heat up again and then run it thru the Millipore.... As long as everything was mixed correctly and dissolved filtering will do the trick. Give it a try and let us know.

 

[DewLover]

I'll certainly do that when I get back. Just never seen that happen before, its typically crystal clear when its cold or when its heated back up to go thru the filter. Just cant figure out what would cause it to look undissolved.

 

[BEASTZ6]

The same thing happened to me. I set it aside, and the next day the swirls were gone.