Test Prop/Mast Prop Cycle Pinning Input Please

[BulletWoods]

Yo fellas,
I am a few weeks away from starting a cycle of Test Prop/Mast Prop pinned EOD. I have never pinned anywhere but glutes and never more than two pins per week. Is pinning glutes and delts enough for EOD or do I need to add a third location? I have 23G in both 1.5" and 1". Thanks for any input on this!

 

[Zhayedan]

Ideally you want to add a third injection site into the rotation. Both quads and ventrogluteal injections are easy to do options with minimal pip. Also for delts I would recommend a 5/8" 25g needle for smoother injections.

 

[PrinceDianabol]

Ideally you want to add a third injection site into the rotation. Both quads and ventrogluteal injections are easy to do options with minimal pip. Also for delts I would recommend a 5/8" 25g needle for smoother injections.

This^^

Although I use a 25g for every injection, no matter the site... Less pip, less scar tissue build up. Why use a bigger needle when you don't have to? Oil flows through a 25g quite easily.

 

[BulletWoods]

Ideally you want to add a third injection site into the rotation. Both quads and ventrogluteal injections are easy to do options with minimal pip. Also for delts I would recommend a 5/8" 25g needle for smoother injections.

This^^

Although I use a 25g for every injection, no matter the site... Less pip, less scar tissue build up. Why use a bigger needle when you don't have to? Oil flows through a 25g quite easily.

I have never used anything smaller than a 23G and have a bunch on hand. I have never had much PIP (except T400, but that is a whole other story), so I am not too worried. Is there a lot more PIP in delts and quads?

 

[Southernfish]

PIP isnt based on inj site it has to do with the product your injecting, and prop will absolutely cause you some discomfort, but its nothing you wont be able to handle.

 

[unkazra1]

2quads...2glutes...1 delt. Its a wrap.

 

[palmers]

do chest, chest is my fav! I hate shoulder shots

 

[traps09]

23's are fine for anywhere. And yeah, i would add delts. Tri's, lats and traps are fine too.

 

[BulletWoods]

Is there anything to the thought that where you inject builds faster? Example, when I pin glutes, it is much easier to notice gains there. Just wondering because I would pin delts and chest for added growth if there is anything to that.

 

[Southernfish]

Is there anything to the thought that where you inject builds faster? Example, when I pin glutes, it is much easier to notice gains there. Just wondering because I would pin delts and chest for added growth if there is anything to that.

No, AAS will not cause the site you inject into to grow. It might get inflamed a bit a look a little bigger but new muscle fiber isn't going to form.

 

[oldmusclemike]

PIP isnt based on inj site it has to do with the product your injecting, and prop will absolutely cause you some discomfort, but its nothing you wont be able to handle.

I agree but sometimes places like delts can get sore if you move around much.

After all my years of 22G,23G and 25G I found that If it is water base like prop I use 25G 5/8" in my delts. I will also use 25G5/8 in glute because I don't have the fat tissue and if you flex and hit on top pot the muscle push in deep it is deep enough. I draw with a 23G or 22G, just easier.
For All my OILs I use 23G 1".
But as said quads, delts and that's four locations. Not much scare tissue w/ 25G 5/8" Good luck

 

[Southernfish]

I agree but sometimes places like delts can get sore if you move around much.

Ya that's just the nature of the beast, im mean, with the amount of injections a guy does your gonna end up with a bad one or two sooner or later. Ive had some very painful injection over the years, not many but fuck, some I hope to never feel again. Mostly in glutes to be honest, I had to stop shooting there altogether.

 

[oldmusclemike]

Is there anything to the thought that where you inject builds faster? Example, when I pin glutes, it is much easier to notice gains there. Just wondering because I would pin delts and chest for added growth if there is anything to that.

OMG...NO there is no targeted site injection.

No, AAS will not cause the site you inject into to grow. It might get inflamed a bit a look a little bigger but new muscle fiber isn't going to form.

^^^ THIS ^^^
Also if you understand how steroids work. In simple terms Anabolic steroids speed up the process in our body to help synthesize protein into muscle at a faster and more efficient rate. That synthesis doesn't happen at the site.

 

[BulletWoods]

Thanks guys! I am going to start with the 23G I have and see how that goes....only because I have so many on hand. Thanks for the input!

 

[oldmusclemike]

Is there anything to the thought that where you inject builds faster? Example, when I pin glutes, it is much easier to notice gains there. Just wondering because I would pin delts and chest for added growth if there is anything to that.

Thanks guys! I am going to start with the 23G I have and see how that goes....only because I have so many on hand. Thanks for the input!

Hey I don't know where you live. Wall-Mart has a no ask policy and all the syringes are .25 cents each. I buy by the box at $10.58 per 100.

 

[BulletWoods]

Hey I don't know where you live. Wall-Mart has a no ask policy and all the syringes are .25 cents each. I buy by the box at $10.58 per 100.

I did not know that. I am in the U.S. I usually just order when I order my AI and PCT products.

 

[oldmusclemike]

I did not know that. I am in the U.S. I usually just order when I order my AI and PCT products.

That's cool man. I find that if I have the money I just get/order a box of 100 23G 1" and a box of 100 25G safety 5/8" and I'm G2G for a long time and don't have to worry about ruining one here or there or using another one to draw. If a guy needs one or two I give it to them. I only know two locals here, but they have needed a few so ya know "here have 1 or 2" WE spend so much on gear why worry and scrimp with this end. Be cool now!

 

[BulletWoods]

Have you ever used a plastic cannula to draw? My one local friend who uses gear here gave me a few. Amazingly fast compared to a 23G. So fast, I actually pre-load a few weeks worth of gear so I don't have to worry about taking the time next time. I have to pin at work (fiance would dropkick me in the nuts) so the faster the better for me.

 

[Southernfish]

Have you ever used a plastic cannula to draw? My one local friend who uses gear here gave me a few. Amazingly fast compared to a 23G. So fast, I actually pre-load a few weeks worth of gear so I don't have to worry about taking the time next time. I have to pin at work (fiance would dropkick me in the nuts) so the faster the better for me.

I dont know what a plastic cannula is but I wouldnt be preloading pins bro, some of the solvent used in the making of the gear can eat away at the runner stopper, you do not want that in your body!!

 

[BulletWoods]

I dont know what a plastic cannula is but I wouldnt be preloading pins bro, some of the solvent used in the making of the gear can eat away at the runner stopper, you do not want that in your body!!

Thanks for the heads up. I did not know that. For this cycle, with pinning EOD, I will probably load 2-3 at a time just to get me through a week. See any issue with that?