Hellcat
New member
hello
i have a problem with my new batch test-e powder, hope someone knows about this problem, i will explain it detailed:
first i opened the aluminium bag and found out, that the test-e was no powder, just fragments, like wax. i know this is not unusally with test-e, but this time, there was really no fine powder there, even we have a very cold season now. also the colour wasnt white, it was like grey. but it is definately test-e, because it has the characeristic smell.
next i put the 'wax' into the bottle, to mix it with the carrier. it was hard for me to insert it into the bottle, because of the fragments, it was similar like putting a cream into a bottle.
ok, then...i mixed it with my carrier, which is made of eo, ba, bb and gso, no special mix, since test-e is so easy to brew. i put it on the stove with 60°C, as usual.
the solution never gets clear. i also noticed, that when i opened the bottle to release the pressure, there was always pressure on it. usually the pressure will be gone, after the solution is solved completely. the solution was always dirty and cloudy.
ok, i gave a try and put it into my filter machine. the solution which was filtered was clear, but after a while it began to be cloudy! i stopped filtering now.
i am using 0,2mµ membrane nylon filter as usual. also the carrier was the same, like usual for test-e.
i fear now, that the chinese supplier has sent me a bad batch of test powder! i will also contact him and claim substitute, but anyway, i want to hear from someone else the opinions than from the supplier, coz i know he is only a seller. and as known, all chinese suppliers are always the best lol
please advise. thx...
i have a problem with my new batch test-e powder, hope someone knows about this problem, i will explain it detailed:
first i opened the aluminium bag and found out, that the test-e was no powder, just fragments, like wax. i know this is not unusally with test-e, but this time, there was really no fine powder there, even we have a very cold season now. also the colour wasnt white, it was like grey. but it is definately test-e, because it has the characeristic smell.
next i put the 'wax' into the bottle, to mix it with the carrier. it was hard for me to insert it into the bottle, because of the fragments, it was similar like putting a cream into a bottle.
ok, then...i mixed it with my carrier, which is made of eo, ba, bb and gso, no special mix, since test-e is so easy to brew. i put it on the stove with 60°C, as usual.
the solution never gets clear. i also noticed, that when i opened the bottle to release the pressure, there was always pressure on it. usually the pressure will be gone, after the solution is solved completely. the solution was always dirty and cloudy.
ok, i gave a try and put it into my filter machine. the solution which was filtered was clear, but after a while it began to be cloudy! i stopped filtering now.
i am using 0,2mµ membrane nylon filter as usual. also the carrier was the same, like usual for test-e.
i fear now, that the chinese supplier has sent me a bad batch of test powder! i will also contact him and claim substitute, but anyway, i want to hear from someone else the opinions than from the supplier, coz i know he is only a seller. and as known, all chinese suppliers are always the best lol
please advise. thx...
