Freezing Vials in shipment?

[Kmaster15]

Hey guys, I have an order from OP that is currently in shipment and the thing is where I live it has been well below freezing nearly 0 degrees F, was wondering if the vials would freeze and if it would cause damage or not. Just Test E. Thanks guys.

 

[Norsegod]

You should be good. it's the same where I am. Fucking sucks. I'm going back out west. f this shit. Anyway, the amount of time it's in the freezing weather shouldn't cause it to freeze. I have ordered stuff over past winters during weather like this and it's been fine. It is does crash just reheat it in hot water. you'll be fine.

 

[Roush]

This is really going to depend on the oil your lab uses.. Can varry from a freezing point from 0 To -32

Is it cotton seed oil or ethyl oleate or what.. The ester is prob he determining factor

 

[Kmaster15]

Ok sweet, unfreezing them isn't that big of deal but I just didn't want the stuff to be less potent in anyway.

Has anyone's vials cracked from freezing though?

 

[casperthefriendly]

Ok sweet, unfreezing them isn't that big of deal but I just didn't want the stuff to be less potent in anyway.

Has anyone's vials cracked from freezing though?

The vials shouldn't be anywhere near full enough for this to be a concern.

 

[00pmac00]

i received a bunch of vials from a lab in December. All the same product Test Cyp.
They were all frozen, 6 in total. I thawed them out and it was still just jelly like, with crystals and some free oil.
All I had to do was place them on a coffee pot burner for 10 minutes or so, they were hot, they liquefied
I shook them while hot and they cooled down in their proper state. One when cooled went cloudy, I just did the process over
and was good to go again. I have since used one of the vials and the injection was just fine.
It was my first time doing this and using a product that wasn't perfect from the beginning, so I was nervous, but everything went fine
just like the lab told me it would be.

 

[Matt0071]

If they freeze try heating theem up tomgrt them back from a solid to liquid state again
Heres how it is done
Insert a needle to the top of the vile like the same as if u were drawing out without the syringe
The needle is use for venting the heat
Your gonna use a coffee maker for the hotplate, so stick the vile on the hotplate and swirl the vial every few min, leave it on the hotplate for 8-10 min till u see it change from a solid bsck to liquid state
Had frozen vials as I live in canada so this time of year never fails, this method works wonders bro

 

[ken3531]

It's fine to just heat them up and have the hormone dissolve again. A colder solvent decreases the solubility of materials dramatically. Nothing has changed, the hormone just became solid again due to the decreases solubility of the carrier oil/liquid.

 

[sadpanda]

mine always freezes

just heat it up on the stove and they are back to normal lol