Injection Question

[TM4N]

Ok just to clear things up for myself. When you take the syringe out of the packaging the plunger is pulled back about .20cc's. If i want
to inject 1cc am i supposed to pull back to 1.20cc's or just 1cc?

 

[THE-DET-OAK]

if your asking how much air to inject it doesnt matter as long as its more than the amount you will be drawing. 3cc of air might be too much-dont wann blow the top off the vial.

when drawing solution-draw exactly what you want to inject. meaning inject air into vial-and push plunger all the way in. then draw the desired amount.

 

[drewbolic]

Ok just to clear things up for myself. When you take the syringe out of the packaging the plunger is pulled back about .20cc's. If i want
to inject 1cc am i supposed to pull back to 1.20cc's or just 1cc?

What OAK said^^^^

If your injecting 1cc/ml your syringe would be filled with oil to the 1-no air in the syringe

 

[TM4N]

Ok that kinda clears things up. So if i want 1cc of solution, i have to replace what i take out so at least 1 cc of air. If i get an air pocket in the syringe is that ok?

 

[TM4N]

ok so no air in the syringe.

 

[drewbolic]

try to get all the air out but if there are small bubble or 2 its not going to kill you like an IV inj.

 

[chevyon6s]

it will come with time grasshopper

 

[TM4N]

haha thanks.

 

[Greazy-Pickle]

a few bubbles is fine.. youll waist have the gear trying to get them all out.. just make sure you get that 1 big fucker out.. this is why i always aspirate.. and i never put air back into the vial "something about putting this polluted american air back into my juice always turns me off".. but i draw with an 18g so i have no issues..

 

[THE-DET-OAK]

thrashin taught me a lil trick too

when you inject there is some gear left in the syringe-if you leave a decent bubbly in their-it will force the gear that would have nromally been left in the syringe into your muscle