Need help planning next cycle - Please critique

[roidjuice]

I'm 23 6 foot 205 and about 13% bf. I've done 2 cycles before.

first
dbol 25 mg/ed 6 weeks
winny 50 mg/eod 1-8

seecond
winny 50mg/ed 1-8
Sust 500 week 1&2, 250 3-6
Clomid PCT

My goals for my next cycle are to reduce body fat while putting on lean mass.
If I could get down to 7-8% and 205-215 that would be awesome. I have access to a good variety of products and would like to know what people's opinions are and what I should look into. I'm planning on doing a 12 week cycle if that helps at all. I liked the results on Winstrol (winny) but it did hurt my joints towards the end.

Here is what I came up with. please let me know your opinions about it. My diet will be very good, plenty of protien, lower carbe etc.

EQ 500mg/week 1-12
Test Ent 400mg/week 1-10
Winny 50mg/ED 6-12

Possibly some T3 or clen in there but I need advice on that.....

When would I start clomid after this cycle? Should I run test longer, should I go the full 12 weeks? Is this a good 3rd cycle for the results I'm looking for. Will there be many sides with this cycle?

 

[StoneColdNTO]

You might want to think about changing the cycle to look like this;

Week 1-12 - Test Enan @ 400 mg/wk
Week 1-11 - EQ @ 500 mg/wk
Week 8-14 - Winstrol (winny) @ 50 mg ED

That way all the gear is going to clear at the same time and you can start post-cycle immediately following the Winny.....well... 24 hrs after your last Winstrol (winny) injection.

 

[bronco944]

sc, you need to go on vacation or something, give us other members a chance reply, lol

 

[roidjuice]

You might want to think about changing the cycle to look like this;

Week 1-12 - Test Enan @ 400 mg/wk
Week 1-11 - EQ @ 500 mg/wk
Week 8-14 - Winstrol (winny) @ 50 mg ED

That way all the gear is going to clear at the same time and you can start post-cycle immediately following the Winny.....well... 24 hrs after your last Winstrol (winny) injection.

THanks again SC. This is why hang around here. U guys always helpin out the new guys! I knew I didn't have the timing right but wasn't sure how to correct it. Thanks.