Red layer on bottom of tren

[titanium4321]

Hey guys. I have a bottle of homemade tren brew I made about a year ago. It has been stored in a cool dark place during that time but there is a Red layer caked on the bottom of the inside of the vial. I have tried to shake it up, but it doesn't dissolve in the oil. Is that the tren at the bottom.

If so, what is the best way to get it to dissolve back into the oil?
Should I heat it up?


Thanks for your help!

 

[Mr. X]

I had the same problem after mine sat a while. I think it's the dye and glue that didn't get filtered out properly when you made it. I used mine no problems.

Good luck

 

[ricosuve]

I had the same problem after mine sat a while. I think it's the dye and glue that didn't get filtered out properly when you made it. I used mine no problems.

Good luck

that is exacly what that is, refilter if it bothers you

 

[WannaBe]

don't know if this would work but you could try reheating it by submersing the vial in boiling water half way up the vial (half in the hot water and half out) with a needle sticking out of the top to vent (like when you are making it initially). heat suspends the tren in the oil during the initial brewing process. worth a try.