Been a lurker but wanted my 1st post to be constructive or at least informative. Just completed a 12 week Test E only cycle. Ran 3 different brands for 4 weeks each. Just to compare their relative qualities.
Got them in Thailand where all 3 brands are FDA approved & displayed & sold openly. All were Test E @ 250mg/ml. All were drawn with 23G & pinned with 25G.
Right off the bat I would like to say I am not selling anything ... so don't ask!
Unigen Depo Test
Packaging: Amps @ 1ml. 5 per pack. Also sold in 10ml vials.
Security: ULS security scratch code. All products checked-out.
Price: Cheapest by a tad.
Breaking: Easy. Amps scored all round.
Drawing: Super easy! Oil is so thin it draws like water. I reckon you can pin it with a 27G.
Fill: Spot on at 1ml.
PIP: A little numbness that lasted a day at most.
Other: The oil used didn't have much of a lubricating affect. Rather difficult to fine adjust the air out when prepping the syringe. Injecting was easy though.
Bayer Schering Testoviron
Packaging: Amps @ 1ml. 20 per pack but most pharmacies will sell individual amps.
Security: None.
Price: Most expensive. 40% more dear than Rotex.
Breaking: Easy. Amp is only notched but was suprisingly easy to break.
Drawing: Oil is thick so took about a min.
Fill: Overfilled. Could get 1.2ml after adjusting air out. So was getting 300mg each time.
PIP: Talk about smooth! Any numbness didn't last more than 2 hours.
Rotexmedica Test E
Packaging: Amps @ 1ml. 20 per pack but most pharmacies will sell individual amps.
Security: None.
Price: A fraction more expensive than Unigen
Breaking: The most difficult. Amp is only notched & really had to put my thumb into it.
Drawing: Oil is the thickest. The longest to draw.
Fill: Overfilled. Could get 1.2ml after adjusting air out. So was getting 300mg each time.
PIP: The most numbness & usually lasted 2 days. Probably due to the thick carrier. That being said, it was still bearable & not as bad as say a Sustanon/Test P jab.
Got them in Thailand where all 3 brands are FDA approved & displayed & sold openly. All were Test E @ 250mg/ml. All were drawn with 23G & pinned with 25G.
Right off the bat I would like to say I am not selling anything ... so don't ask!
Unigen Depo Test
Packaging: Amps @ 1ml. 5 per pack. Also sold in 10ml vials.
Security: ULS security scratch code. All products checked-out.
Price: Cheapest by a tad.
Breaking: Easy. Amps scored all round.
Drawing: Super easy! Oil is so thin it draws like water. I reckon you can pin it with a 27G.
Fill: Spot on at 1ml.
PIP: A little numbness that lasted a day at most.
Other: The oil used didn't have much of a lubricating affect. Rather difficult to fine adjust the air out when prepping the syringe. Injecting was easy though.
Bayer Schering Testoviron
Packaging: Amps @ 1ml. 20 per pack but most pharmacies will sell individual amps.
Security: None.
Price: Most expensive. 40% more dear than Rotex.
Breaking: Easy. Amp is only notched but was suprisingly easy to break.
Drawing: Oil is thick so took about a min.
Fill: Overfilled. Could get 1.2ml after adjusting air out. So was getting 300mg each time.
PIP: Talk about smooth! Any numbness didn't last more than 2 hours.
Rotexmedica Test E
Packaging: Amps @ 1ml. 20 per pack but most pharmacies will sell individual amps.
Security: None.
Price: A fraction more expensive than Unigen
Breaking: The most difficult. Amp is only notched & really had to put my thumb into it.
Drawing: Oil is the thickest. The longest to draw.
Fill: Overfilled. Could get 1.2ml after adjusting air out. So was getting 300mg each time.
PIP: The most numbness & usually lasted 2 days. Probably due to the thick carrier. That being said, it was still bearable & not as bad as say a Sustanon/Test P jab.
Last edited:
