thinking about brewing tren a

[foamy27]

I just read this post http://www.steroidology.com/forum/775825-post4.html found it in another tren thread that was just posted.

But anyways, Ive been wanting to try and brew my own tren for a few weeks now, and Im wondering what exactly I will need, he did list some things in the link but It got a little confusing.

Im wanting to do a 4g kit. So if I remember correctly I will need two fina carts, is this correct? also will all of the filters and vials that I need come in the 4g kit? Or should I go another route?

any input would be appreciated, thanks!

 

[Pinnacle@Rep]

I just read this post steroidology.com/forum/775825-post4.html found it in another tren thread that was just posted.

But anyways, Ive been wanting to try and brew my own tren for a few weeks now, and Im wondering what exactly I will need, he did list some things in the link but It got a little confusing.

Im wanting to do a 4g kit. So if I remember correctly I will need two fina carts, is this correct? also will all of the filters and vials that I need come in the 4g kit? Or should I go another route?

any input would be appreciated, thanks!

Yeah, the equipment you need will come in that kit. and two carts of the pellets is 4 grams.

 

[Pinnacle@Rep]

I just read this post steroidology.com/forum/775825-post4.html found it in another tren thread that was just posted.

But anyways, Ive been wanting to try and brew my own tren for a few weeks now, and Im wondering what exactly I will need, he did list some things in the link but It got a little confusing.

Im wanting to do a 4g kit. So if I remember correctly I will need two fina carts, is this correct? also will all of the filters and vials that I need come in the 4g kit? Or should I go another route?

any input would be appreciated, thanks!

better thing for you to do though, is go to basskiller.com and check out those brews and combine the info there with Dtones recipies from this site in the top of the chemical study forum or block whatever you call it. Save your money on those high priced KITS and buy your own supplies. I'll dig up some places for you to get oils vials and the solvents you need and post em' here.

 

[Pinnacle@Rep]

I just read this post steroidology.com/forum/775825-post4.html found it in another tren thread that was just posted.

But anyways, Ive been wanting to try and brew my own tren for a few weeks now, and Im wondering what exactly I will need, he did list some things in the link but It got a little confusing.

Im wanting to do a 4g kit. So if I remember correctly I will need two fina carts, is this correct? also will all of the filters and vials that I need come in the 4g kit? Or should I go another route?

any input would be appreciated, thanks!

lemelange.com will help you for the oils and solvents, labfilters.pall.com or scientificfilters.com will help you for the whatman filters, **************.net these guys can take care of vials and other stuff syringes etc... They're all GTG
Then you save yourself a boatload over the course of 3-4 batches. Also, to be honest with you this finaplix stuff sucks, just my opinion. Best thing for you to do is what most ppl are doing and just sit and play the waiting game and try to procure you a source for some powders. The raw powders will be easier to convert (so i've been told) with less worries. But it could take you a while to secure a trusted source.

 

[Pinnacle@Rep]

I noticed that one of the sites I posted for this guy up here to get his vials from has been blocked out.... are we not allowed to even post sources for perfectly legal supplies for someone????

 

[RJ]

I noticed that one of the sites I posted for this guy up here to get his vials from has been blocked out.... are we not allowed to even post sources for perfectly legal supplies for someone????

its not for that reason. there used to be a site called R E S E A R C H L A B S U P P L Y and they got busted by the feds for some shady shit back in the. No affiliation to the site you are talking about, but i think its embedded into the site to have it blocked out.

 

[Pinnacle@Rep]

Oh, okay cool. Well then in that case bro... for your syringes and vials etc go to research
s u p p l y dot net.

Hopfully you can read/understand that.

 

[foamy27]

lemelange.com will help you for the oils and solvents, labfilters.pall.com or scientificfilters.com will help you for the whatman filters, **************.net these guys can take care of vials and other stuff syringes etc... They're all GTG
Then you save yourself a boatload over the course of 3-4 batches. Also, to be honest with you this finaplix stuff sucks, just my opinion. Best thing for you to do is what most ppl are doing and just sit and play the waiting game and try to procure you a source for some powders. The raw powders will be easier to convert (so i've been told) with less worries. But it could take you a while to secure a trusted source.

alright awesosme, thanks for all of the help Im sure it will be way cheaper to buy it all seperately instead of a kit!

 

[Pinnacle@Rep]

alright awesosme, thanks for all of the help Im sure it will be way cheaper to buy it all seperately instead of a kit!

Yeah, research is the key! No sense in a bunch of ppl making money on things that are inflated and you can easily purchase legally. That is how/why our economy got where it is among other things.
Just make sure to do research on the quantities and download the calculator for brewing in this forum somewhere (can't remember)
I usually use 3% BA, 20%BB then the rest Ethyl Oleate, (ethyl oleate is expensive but it makes for thinner gear and pins easier) but you can also use grapeseed, sesameseed, cottonseed oils and do a 50/50 Ethyl oleate/grapeseed oil mix.
Tell us how it came out for ya!

 

[foamy27]

alright thanks bro. It's going to be a few weeks until I get to brew it but I will deff. let you guys know

 

[Pinnacle@Rep]

alright thanks bro. It's going to be a few weeks until I get to brew it but I will deff. let you guys know

Well let me know something because I'm having some crashing probs. and depending on how yours works out maybe we can help each other. I am about to refilter and see if that helps. I'm in a cold climate right now and I think the coldness might be contributing to the crashing cause it is not staying room temp where I'm stashing it! Does this shit crash at a colder climate??? Anyone?? I'm about to post picks, HOPE I can post em' here. I got one vial I'm keeping close to heat and the others not. The vial close to heat gives smooth painless injections, the others that are not close to heat hurt like hell for like 3 days?????????????????????

 

[Pinnacle@Rep]

Now I know it is hard to see, but the vial on the left is crystal clear but the one's on the right are with precipitates. Those are the one's that cause pain and swelling. I think I will try to take em' and refilter them. I used one whatman filter for 5 vials and it got easier and easier to push em thru as I went so I think the whatman may have developed a hole or something inside that was allowing junk to come thru cause you would think It would get harder and harder not easier and easier, to push thru the filter....

 

[Ironmonger]

I have bought oil, BB, and BA from lemelange.com in the past and their prices are dirt cheap. The problem is the stuff isn't that clean and will provide some seriously painful injections (lumps). I think it's the BA, but I'm not sure. After that, I ended up buying human grade supplies and haven't had a problem since. I did everything correctly and even used a .22 filter.
If others have had success with them, more power to them, but IMO, it's better to start with known, quality ingredients when starting out. That being said, I think buying a kit for your first time is a wise investment. Once you get the hang of it, you can start trying other sources.

 

[Pinnacle@Rep]

I have bought oil, BB, and BA from lemelange.com in the past and their prices are dirt cheap. The problem is the stuff isn't that clean and will provide some seriously painful injections (lumps). I think it's the BA, but I'm not sure. After that, I ended up buying human grade supplies and haven't had a problem since. I did everything correctly and even used a .22 filter.
If others have had success with them, more power to them, but IMO, it's better to start with known, quality ingredients when starting out. That being said, I think buying a kit for your first time is a wise investment. Once you get the hang of it, you can start trying other sources.

That makes sooo much sense man! Me and my buddys that are on some homebrew now are using the lemelange stuff EO, BA, BB and we're having ppl swelling up and pains like nobody's business! If you got a good place for pharma grade (or human grade) supply can you PM me and share?

 

[SouthernCharm]

That makes sooo much sense man! Me and my buddys that are on some homebrew now are using the lemelange stuff EO, BA, BB and we're having ppl swelling up and pains like nobody's business! If you got a good place for pharma grade (or human grade) supply can you PM me and share?

x 2!!

 

[Ironmonger]

Yeah, I bet it's your supplies. I tried everything and it didn't help.
I ended up cutting what I had with clean oil and that took away the bad injections. I would cut it with about 30% straight oil.
I bought my last batch of oil, BB, and BA from rui-products.com. Finafarm also sells it, and I've bought from them in the past. Both are pricey, compared to lemelange, but to me it's not worth looking like gumby and feeling like rodney king.

 

[SouthernCharm]

id rather pay a higher price for quality... Youre still saving money by making your own gear and you have the peace of mind that you won't look like you got attacked by a swarm of Africanized bees.

 

[Ironmonger]

I would PM you, but I can't yet. Word on the street is I have to stab or shoot a random person, gang initiation style, before I can PM.
But since the stuff can be bought legally, I can just post here.

 

[Pinnacle@Rep]

I would PM you, but I can't yet. Word on the street is I have to stab or shoot a random person, gang initiation style, before I can PM.
But since the stuff can be bought legally, I can just post here.

Well if you're in the stabbing mood then as long as you're paying I'd like a 10 weeks worth of stabbing of sustanon,tren, and anadrol!!!!

 

[Ironmonger]

Well if you're in the stabbing mood then as long as you're paying I'd like a 10 weeks worth of stabbing of sustanon,tren, and anadrol!!!!

Where's the "like" button?