Chester4Life
Ya like strippers?
just curious....why no BB in tren?
Tren question..
- Thread starter Chester4Life
- Start date
Chester4Life
Ya like strippers?
Here...........
Makes 50 ml @ 200 mg/ml Tren for 5 grams
Needed
5 grams Tren powder
43.75 ml sesame oil
2.5 ml benzyl alcohol = 5%
Syringes 3cc & 5/10cc
18 or 20 gauge needles mixing Vial sterile vial whatman sterile filter 1. Weigh out 5 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.
Makes 50 ml @ 100mg/ml Tren for 10 grams
Needed
10 grams Tren powder
84.5 ml sesame oil
5 ml benzyl alcohol = 5%
Syringes 3cc & 5/10cc
18 or 20 gauge needles mixing Vial sterile vial whatman sterile filter 1. Weigh out 10 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.
Makes 100 ml @ 100mg/ml
Makes 50 ml @ 200 mg/ml Tren for 5 grams
Needed
5 grams Tren powder
43.75 ml sesame oil
2.5 ml benzyl alcohol = 5%
Syringes 3cc & 5/10cc
18 or 20 gauge needles mixing Vial sterile vial whatman sterile filter 1. Weigh out 5 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.
Makes 50 ml @ 100mg/ml Tren for 10 grams
Needed
10 grams Tren powder
84.5 ml sesame oil
5 ml benzyl alcohol = 5%
Syringes 3cc & 5/10cc
18 or 20 gauge needles mixing Vial sterile vial whatman sterile filter 1. Weigh out 10 grams of powder.
2. Place powder in vial.
3. Add BA to the vial.
4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill one of the indentions this is plenty for these experiments. Also heat more oil than you need, as you will not be able to get it all out of the pan.
5. Add oil to the vial, save 2 ml of oil in the syringe for later. Gently shake vial.
6. Heat mixture if necessary. I like heating my powder products, by placing the vial in a frying pan, and placing it on the eye of the stove.
7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile filter.
8. Place another needle in the sterile vial to relieve the pressure.
9. Draw out solution with a syringe, run though whatman filter.
10. Take other syringe with 2ml oil, run through whatman into solution.
Makes 100 ml @ 100mg/ml
GymLift
New member
I think that tren might be the only hormone that I've made with BB. Everything else is oil+BA, but I do use one of these prior to drawing up the oil:Swellin said:
Really, I don't need the microwave, but it does help, especially for stuff at 500mg/mL.
I draw with a 20G, which is a bit hard on the stoppers.
Chester4Life
Ya like strippers?
thanks......
mustanged77
Tren Freak
I agree. And there is no need to bake anything. Baking is a chemist proceedure for drying powders not sterilizing oils.mranak said:
