Can't inject

B

BalcoBob

New member
Beyond pist...I tried my shoulder and it won't go in I pull the needle out still nothing I'm pushing super hard and it just won't inject. I switched to my quad and I push and I feel like I'm gonna break the needle it sometimes takes me 15 mins to inject. Scar tissue?
 
I get that sometimes,feels like the needle is bending. I twist the needle a little, seems to work.
 
StoneColdNTO said:
You are using a 3cc syringe, correct?
Try a 1cc syringe, and it will push with very little resistance.
Click to expand...
Plus one on this...I always use 25 ga pins and in my quads i use 3cc syringe and my shoulders I use 1cc/25 ga...the difference in resistance is night and day..if this deosnt help, you can try heating the oil and also going to a bit larger pin if its still too hard.
 
Yea when I first started pinning I tried a 25g woulden work for me so I used a 23 g and worked fine... If nothing else u could try a 18g right ? Lol jk
 
You an LS1 fan Matt? Good choice ;). I know a guy who injected his biceps with 18g needle. Man did that leave a bruise!!
 
Here is my advice...not sure if your doing this or if it helps...I get a 10ml 22 or 23 gage needle. I draw from it then switch out the needlefor a fresh one. the needle gets dull after you poke the top of the amp. When I first started i had your problem too. Hope that helps. I like to do half in one shoulder and half any the other. I put my first 25 on that way! Mostly seem to hit my shoulders.
 
bobistheman said:
You an LS1 fan Matt? Good choice ;). I know a guy who injected his biceps with 18g needle. Man did that leave a bruise!!
Click to expand...

Sure am had a 99 ss m6 car loved the car but had to sell it best car I ever had ill be back in the marked for an lsx car when the new camaro drops in the used car prices.. The biggest lsx car show is just up the road from where I live the lsfest ever heard of it?
 
Yeah I have heard of it. I have an fbody parked in my garage right now. Getting a forged shortblock and some boost over the winter. PM me if you want to talk more. Don't want to hijack this thread.
 
I always squeeze a small drop of oil form the syringe before injecting and let it slide down the pin. This way it lubricates the needle and it goes in very smooth. Try it.
Also, try to relax the muscle you're injecting as much as possible. I always catch myself tensing up before injecting, so I have to make a conscious effort to relax.
 
Last edited:
If you don't already try heating your a cup of water in your microwave. Tak it out and put your vial in there for 2 mins. Helps me alot, gear shoots smoth and helps with pip.
 
I'm using 23 g...I'm gonna shoot now lets see how it goes. I'm gonna shower and try not to tense up. Also I have been getting this cough feeling wtf is that? It's test not tren I got it 3 shots in a row.
 
Hey, I suggest before you inject release a tiny bit of gear and let it trickle down the syringe. Being that it is an oily substance it makes for a good lubricant. This will make the needle easier to jab. Good luck bro!
 
I wouldn't go with a bigger gauge. If you have scar tissue, then you will just make it worse. I would give slin pins a try. They always go in really smooth for me. I use 29 gauge 1/2 inch 1cc and shoot them in to the muscle. If you are pretty lean, they will work just fine. I would try that before I would go to a bigger gauge. Second option is find some new sites. I do chest injections, and try the ventro glute as well.
 
You must log in or register to reply here.

Similar threads

T
Trouble injecting Winsterol
Replies
0
Views
255
tomclub
T
Destination230
I injected air - is this serious
Replies
6
Views
1K
LateStart
L
appleton111
The process of Peptide Reconstitution
Replies
0
Views
625
appleton111
appleton111
R
Looking for some advice and questions regarding injection sites
Replies
6
Views
1K
Gossamer
G
3
injected at least 3/4 ml gear into vein
Replies
5
Views
884
Nicky_eye_lids
Nicky_eye_lids
Back
Top