GHRP6 NEED HELP! measurements etc cheers.

H

harrybrah

New member
Hi guys just got my 8 bottles of GHRP6 and everything else i need. Although I'm not the smartest with measurements how do i go about getting 5mls of bac water with this Syringe ? cheers

i have access to 1ml (cc) syringe does that mean the entire syringe equates to 1 ml so to require 5 mls of Bac water i would need 5 full syringe loads?

also once i have loaded the 5mls of bac water to get the 100mcg dose of GHRP6. the equation would be 5 divided by 50= 0.1 or 10 on the syringe? so for every 10 i would get 100mcgs?

fixing these 2 issues would be great to get this cycle going cheers help needed asap!

NOTE* FIRST TIME USING PEPTIDES OR ANYTHING INJECT ABLE*

Fast helpful legitimate help would be greatly appreciated( anyone with lots of experience would be great help)

age: 25
reason for use: injuries and healing is slow atm depressed wanna get back into gym. injury=muscle strain grade 2 possible 2-3 months out with this 1 month and a bit reported by many forums and local gymers.
 
How many mgs are your vials of ghrp? Also how many unit are your 1ml slin pins? Do they have 50 units or 100 units (each black line is a unit)?

Here's an example if it were 5mgs and your slin pins were 100 units and you wanted a 12 week cycle:

GRHP-6 5mgs(5000mcg)
Reconstituted with 2ml(200units - 0.01ml per unit) BAC WATER
5000mcg/200units = 25 mcg/unit
100mcg dose = 4 units
200units / 4units per dose = 50 dose per bottle
50 dose per bottle / 3 dose per day = 16.667 days per bottle
16.667 days / 7 days = 2.381 weeks per bottle
num bottles needed = 12 weeks / 2.381 weeks per bottle = 5.04
total bac water needed = 6 bottles * 2ml = 12ml bac water

So your 8 bottles should last you quite a while... (16+ weeks) and a 100mcg dose will only be 4 units of a slin pin (25mcg/unit). This is assuming your slin pin is 100 units of course...
 
Last edited:
Hi vitamin 29g 1/2" needle and 1ml (cc)
syringe combo
100 Per Box

also its Says 100 on the syringe and also i have 5mg bottles. I would prefer doing a 5ml recon with the cycle, because wouldnt i just have to measure to 10, due to 0.1 with the equation would be 100x easier. cheers
 
Kazmir said:
Peptide Reconstitution Calculator - Canada Peptide
Click to expand...

just checked out the website seems mint! although im unsure of what this means) sorry not very technical with measurements of syringes etc if you could make it easy for even a kid to understand that would be perfect. It says=Measure until graduation mark #5
does that mean measure 5 little black lines or am i incorrect? aslo"each graduated mark" is that the little black lines?... contains 20 mcg of GHRP6 a quick easy and swift response getting thise area fixed would be great :)
 
harrybrah said:
Hi guys just got my 8 bottles of GHRP6 and everything else i need. Although I'm not the smartest with measurements how do i go about getting 5mls of bac water with this Syringe ? cheers

i have access to 1ml (cc) syringe does that mean the entire syringe equates to 1 ml so to require 5 mls of Bac water i would need 5 full syringe loads?

also once i have loaded the 5mls of bac water to get the 100mcg dose of GHRP6. the equation would be 5 divided by 50= 0.1 or 10 on the syringe? so for every 10 i would get 100mcgs?

fixing these 2 issues would be great to get this cycle going cheers help needed asap!

NOTE* FIRST TIME USING PEPTIDES OR ANYTHING INJECT ABLE*

Fast helpful legitimate help would be greatly appreciated( anyone with lots of experience would be great help)

age: 25
reason for use: injuries and healing is slow atm depressed wanna get back into gym. injury=muscle strain grade 2 possible 2-3 months out with this 1 month and a bit reported by many forums and local gymers.
Click to expand...

are you doing a GHRP6 cycle only?
 
Kazmir said:
thats right the graduation marks are each black line on the 1cc slin pin
Click to expand...

cheers Kazmir great help bro i get it all now. each little black line etc. Now last but not least 1 more thing. the GHRP6 dosing measurements are sorted. Now i just need know how i would draw up 5mls of bac water on the syringe lol. is it 5 whole syringe loads since its a (1ml) 1 cc syringe? cheers :)
 
harrybrah said:
cheers Kazmir great help bro i get it all now. each little black line etc. Now last but not least 1 more thing. the GHRP6 dosing measurements are sorted. Now i just need know how i would draw up 5mls of bac water on the syringe lol. is it 5 whole syringe loads since its a (1ml) 1 cc syringe? cheers :)
Click to expand...

can u keep my updated on it, im interested to see how it goes.
 
Kazmir said:
yup thats exactly right or use a IM pin if ya have any and do 3CC and 2CC
Click to expand...

the first part seems easier, the last part made me cringe not serious lol. But yeah ill just do 5 whole syringe loads into the vial along the side? and that should recon it :)? also should i put it back in the fridge after recon and leave for 24 hrs or do i start injecting after its been reconned?
 
just re-conned it with 5mls of bac-water. what should i do now? can i inject or should i leave it in the fridge to allow the peptide to further get a good form. :) :P answers would be great
 
Kazmir said:
good to go once it is all dissolved
Click to expand...

cheers man anything else you may need to touch up on? tips etc; like do i wipe down area eg:stomach and vial with alcohol wipes, then pull up dose then inject. etc its still dissolving ATM so ill just wait 24 hours like most other forums have said. :)
 
Your using GHRP-6 to heal some injuries? You should look into the TB-500 peptide. That's the best peptide for solely trying to heal injuries. GHRP-6 does that too but it also releases Ghrelin and that will dramatically increase your appetite and you might end up gaining a lot of unwanted weight. GHRP's also increase cortisol and prolactin levels. If your gonna stick with the GHRP-6, you should add a GHRH like CJC-1295 w/o Dac(Mod GRF 1-29) because the combination of the two gives more than double the effect of either alone, due to the synergy they have together.
 
How would i add in CJC 1295, ive done no research on that. How much should i take? how much should i recon with? 3; will it shut down my natural HGH production? 4; will i need PCT?, 5; when to take eg:morning? night? 6; Im also getting a IGF+1 spray and a powerful hgh booster so i think them 3 combined with some other health supplements will be more than enough to heal imo. ill give it 8 weeks and if i still dont feel right ill bring in CJC with dac. if you give me some good info on it and persuade me that it wont cause harm ill definitely jump right into it.
 
You must log in or register to reply here.

Similar threads

appleton111
The process of Peptide Reconstitution
Replies
0
Views
624
appleton111
appleton111
O
Babys first cutting cycle (Advice please)
Replies
8
Views
4K
appleton111
appleton111
M
First Test E cycle, few questions
Replies
15
Views
3K
casanovaaa
casanovaaa
L
Steroids and holiday for beginners.
2
Replies
22
Views
2K
thatotherguy
thatotherguy
M
The process of Peptide Reconstitution
Replies
1
Views
3K
casanovaaa
casanovaaa
Back
Top