I.U question

Cakalac

Informed Member
I have a product that is 25iu/10ml. If i cut it w/ 10ml bact. water that gives me 2.5iu/ml. To get .25ml/shot would I not take 10iu per shot?
 
I have a product that is 25iu/10ml. If i cut it w/ 10ml bact. water that gives me 2.5iu/ml. To get .25ml/shot would I not take 10iu per shot?

Well is it's 25iu/10ml and you add another 10 ml water, then you have cut the concentration in half, so it's now 12.5iu/10ml.

You lost me on the rest....please try to explain further what it is you are trying to accomplish.
 
sorry, it was in powder form in the vial and it says 25iu/10ml. That may be taking into consideration the 10ml of bact water that gets added. Both the vials were 10ml vials. One had powder in it and the other bact. water. I just took out the water and added it to the powder vial. The dosage i'm looking for is .25cc per injection.
 
Last edited:
The dosage i'm looking for is .25cc per injection.

That's still not right. How many IU's do you want to do?

.25 cc could be any number of IU.s depending on how much water you mix with the powder.

Right now you have a solution of 2.5 IU/cc....so .25 of a cc would only be .8 of an IU.
 
That is what I am trying to figure out? How many iu's to use to get what I need. It is with Tyric. Only thing is there are no dosages except .25ml/2xday. Does that just mean 25iu's after it's constituted with the 10ml water? I hate these damn iu dosages. Why can't it all be mg to mg! LOL Thanks for your help SC. Just be patient with me!

It is a 5 on 2 off schedule. I know your familiar with this stuff... my wife want's to try it for the stress relief benefits and sleep.

I just look at if it's a 30 day supply then there is no way .8iu will use that much product. That is what I had already came up with but knew it wasn't right.
 
Last edited:
Only thing is there are no dosages except .25ml/2xday. Does that just mean 25iu's after it's constituted with the 10ml water?



That 's the way I'd interpret it.....and then the math above is correct; "Right now you have a solution of 2.5 IU/cc....so .25 of a cc would only be .8 of an IU."
 
Ok thanks bro. I probably made it harder than what it should have been but I wanted to be sure since it was the wifey. I will go with the 25cc injection, that sounds right
 
Its pretty simple actually.


1ml=2.5 iu . Divide that by 10 (because thats how a slin pin is set up) and you get .25

Add the supplied water and draw up to the 10 mark on a slin pin. Thats .25iu.
 
Last edited:
Its pretty simple actually.


1ml=2.5 iu . Divide that by 10 (because thats how a slin pin is set up) and you get .25

Add the supplied water and draw up to the 10 mark on a slin pin. Thats .25iu.

If he was looking to inject .25iu it would be, but that's not what he's after. You need to re-read the thread a couple times as it was pretty confusing and all.
 
If he was looking to inject .25iu it would be, but that's not what he's after. You need to re-read the thread a couple times as it was pretty confusing and all.

Ok, i got it. so basically hes splitting the 10ml(1000iu worth on a slin pin) into 40 doses (20 days worth at 2x per day)

1000/40=25

He just needs to mix with the 10ml supplied water and take 25iu on a slin pin 2x a day.
 
25iu per 10ml will end up being a concentration of 2.5iu per ml. or if he is using an insulin syringe the concentration will end up 2.5iu per 100 units (insulin syringe units)

if you want to take .25 ml given you stick with the 2.5iu per 1 ml dossage you will take .625 IU's of tyric for every .25 ml.

REMEMBER ML = CC , ALSO remember when using an insulin syringes they have UNIT MARKS ON THEM, not ML or CC. but it is very easy to figure units into ml/cc
100 units on an INSULIN SYRINGE = 1ml
50 units = .5ml
25 units = .25 ml

my questionis how many IU's of tyric are you wanting to take???? based on that we can give you an ammount to take.
 
my questionis how many IU's of tyric are you wanting to take???? based on that we can give you an ammount to take.



See that was the problem there was not dosage instructions. The understood dosage is .25cc 2x/day. If you have a 1 month supply on a 5 on 2 off schdule the only way it can be is 25 units. Just like Estray broke down above. 25 units X 20 days = 1000iu's so 1000iu's/40 shots = 25iu's/shot
 
Yeah, it is kind of odd they dont tell you how much of the actual compound to take, just how much solution. I mean when we talk about dosages here we talk about how much of the actual gear we take, not how much liquid. lol
 
i would just take 25 units then. given that you reconstituted it to the dosage that they said i would just shoot 25 units on the insulin syringe.
 
Back
Top