made my own tren

[Longhorn85]

So, I finally made my first batch of tren using a fina conversion kit and pellets. My final product looks more yellow than rusty colored, like the previous tren I've taken. Honestly, it looks like piss. I also tasted a little bit of it and it made my tounge tingle.. Is that from the high ba content? Does anyone think it's still g2g? Anyone ever made their own tren using a kit and the pellets have to same final product look like that? Also, how was the injection site? Painful?

 

[thatotherguy]

Tell me more.

 

[valiantmiller16]

pictures? it would be a abit silly for any of us to give advise without actually seeing it i think.

 

[Longhorn85]

here is a picture of what it looks like.

 

[edogger]

its fine

 

[Longhorn85]

what about the tingle on my tounge.. I could only imagine how bad the injection would hurt if it made my tounge feel like that.

 

[tootie]

It's probably gonna hurt like fuck, imo

 

[Longhorn85]

is there any way to heat it up at a certian temperature for a certian amount of time to get rid of some of the BA or should i just add more cottonseed oil?

 

[lartinos]

I've made some just like that that made me fuggin' jacked.

 

[PartyCan]

I've made some just like that that made me fuggin' jacked.

lol... looks like wee

 

[Longhorn85]

I've made some just like that that made me fuggin' jacked.

You use finafarm? Did your product look like piss too? How was the injection?

 

[tootie]

I'd cut it with more oil or just heat it a little before injecting...what i do at least. cept i use grapeseed oil

 

[edogger]

a tiny amount of BA will make your tounge numb..

again, its fine

 

[dialtone]

BA has nothing to do with injection pain. this is one of the oldest false steroid myths still in existence. also, tongue tingle has nothing to do with injection pain. just shoot .5ml of it and assess the injection pain the next day. I admit that it is lighter than normal tren, but that does not mean it is bad. the only way to know is to try it. good luck.

 

[hammer2500]

I hope it works well for you Longhorn. Let us know how you make out with it.

 

[edogger]

im guessing he didnt use any heat when making it hence the yellow color. If you apply any heat during the conversion such as baking your final product it will turn rust color as tren oxidizes easily. doesnt have anything to do with the potency.

 

[Noob]

Looks just like mine, and mine rocks.

Dump that shit and get big.

 

[collin]

BA has nothing to do with injection pain. this is one of the oldest false steroid myths still in existence. also, tongue tingle has nothing to do with injection pain. just shoot .5ml of it and assess the injection pain the next day. I admit that it is lighter than normal tren, but that does not mean it is bad. the only way to know is to try it. good luck.

Well what do say causes injection pain then I would like to no?
I myself always thought that the solvents used were the problem..
I had some pretty painful injects in the past(T400)being one of them from a ugl and had some npp from the same ugl and it was the same thing.
I was told to much ba made sense to me.

 

[Longhorn85]

nope, didn't heat anything at all. I'm going to give it a try tomorrow and see what happens. Let's hope I was as sterile as I think I was and don't end up with a damn infection.

 

[1badmofo]

mine was made from powder, not pellets and it was rusty color in the solvents, and then when I added the CSO it was only slightly rusty, and I didn't use heat because it dissolved so well. I made some primo E today and it did require heat to dissolve.