My blast for the summer. Opinions?

[Steelbronx]

Well im going to be starting my third blast in a few weeks. This is what i have planned

420mg test prop
280mg tren ace
280mg mast prop
Aromasin

Gonna be on this till early september. My doses are pretty low due to the fact that ill be running such a long blast. This is the protocol i have been following for the past 2 years and i am very pleased with it. Cruise/bulk during the winter, blast/cut during the summer. Gonna cut down to about 6-8% bf then go on a slow lean bulk. Already know im gonna get bombarded with people asking for my stats and expierience so here ya go.

28yrs old
5'8"
210lbs 15%bf
Been lifting for 11 years

Gonna be doing ED injections. Equals out to 1cc of gear daily. Since ill only be pinning 1cc would you say itd be safe to stick to only 4 injection sites? Does the blast look good? Am i missing anything? Any input is appriciated.

 

[villan]

nice but you should use 6 injection sites,,delt delt ,,glute glute,,thigh thigh

 

[Steelbronx]

nice but you should use 6 injection sites,,delt delt ,,glute glute,,thigh thigh

Lol yeah i know i probably should, its just a pain to pin glutes. Delts and quads are no problem. I figured since its only 1cc of gear maybe 4 days is long enough for it to be fully absorbed. Does that seem plausible?

 

[tbonexl]

U sure your gear is real? I've never seen any of those with that high mgs/ml. Prop 200 is a nasty mofo to pin and your claiming to have 420mg prop?

 

[Kazmir]

I would definitely pin minimum 6 sites if doing ED injections over a long period.
delt, delt, quad,quad, ventro, ventro at minimum is what I would do but I would probably work in glute or tricep shots as well if it was me.

 

[smittiot]

Think those are his weekly totals, Tbone.

 

[tbonexl]

Nonetheless still odd...

 

[smittiot]

Nonetheless still odd...

Agreed, with the numbers being odd. Maybe they total 1ml per injection, but I dont have time( or care) to do the math.
What I don't get is that if he has been running this protocol for 2 years, then why is he asking about it now?
I think you can treat each quad as 2 injection sites as there is a several inch field to stick. I would put a 4 finger distance between quad pins on a given leg.
So, lower right quad, right delt, lower left quad, left delt, upper right quad, upper left quad.

 

[tbonexl]

Not understanding how it would be easier to put multiple compounds in a barrel that only holds one cc. Something is definitely off...

 

[Steelbronx]

U sure your gear is real? I've never seen any of those with that high mgs/ml. Prop 200 is a nasty mofo to pin and your claiming to have 420mg prop?

Positive. Prop is 150/ml

 

[Steelbronx]

Agreed, with the numbers being odd. Maybe they total 1ml per injection, but I dont have time( or care) to do the math.
What I don't get is that if he has been running this protocol for 2 years, then why is he asking about it now?
I think you can treat each quad as 2 injection sites as there is a several inch field to stick. I would put a 4 finger distance between quad pins on a given leg.
So, lower right quad, right delt, lower left quad, left delt, upper right quad, upper left quad.

Reason I'm asking is because my previous blasts weren't as much gear. This is also my first time running mast. I know some people have prolactin issues with tren so i wasn't sure if it'd be a good idea to have some caber on hand or not. Its a fairly low dose so i don't really think it'd be an issue but i just wanted to get some extra opinions.

 

[Steelbronx]

Not understanding how it would be easier to put multiple compounds in a barrel that only holds one cc. Something is definitely off...

All the gear fits into a 1cc syringe perfectly.

The compounds are

Tren ace/ test prop mix- tren at 100mg/ml prop at 75mg/ml
Test prop- 150mg/ml
Mast prop- 100mg/ml

Fill up the tren ace/test prop mix to 4/10ths (40mg tren, 30mg prop)
Prop to 2/10ths (30mg prop)
Mast to 4/10ths (40mg mast)

 

[Steelbronx]

Pretty sure my math is correct, if not feel free to correct me

 

[tbonexl]

I still think it would be easier using a 3cc barrel. It's a pain in the ass trying to get one cc in a one cc barrel. Your shit though...