sus 250 burnt through plastic!!
- Thread starter geeza
- Start date
Greazy-Pickle
Senior Member
sounds like it was brewed with 100% EO.. id bash on you about the piss cup butthe boys above already did a fine job.. Ethyl Oleate can eat through certain types of plastics/rubbers.. this is why when your making your own you should cut it 50/50.. or like most of us do (except yourself) you could keep it in a sterile glass vial.. lol
I will 2nd that!! I haven't freakin laughed this hard in a long time! You think he is just screwing with us? If not we should pray for him.
THE-DET-OAK
IncreasedMyT @ ULV
yea, it was the EO for sure...............
That was my thought as well it was the EO....Now granted lots of things in this thread would have threw up alarms but all of it can kinda be explained.
Pulling the solution from a shampoo bottle(stealth)...bits of rubber...cheap rubber stopers do break up its happen to me....and the melting through plastic as GP,DET and my self mentioned EO was more than likely the culprit.
So lets go easy with the bashing...did you guys really think it was acid?
This guy is new and he brought this to the board but if we bash the shit out of him the next guy is going to read it and maybe continue to do something harmful for fear if he asks for advice he will be flamed by others.
Pulling the solution from a shampoo bottle(stealth)...bits of rubber...cheap rubber stopers do break up its happen to me....and the melting through plastic as GP,DET and my self mentioned EO was more than likely the culprit.
So lets go easy with the bashing...did you guys really think it was acid?
This guy is new and he brought this to the board but if we bash the shit out of him the next guy is going to read it and maybe continue to do something harmful for fear if he asks for advice he will be flamed by others.
juced_porkchop
Moderator
im sorry but anyone that stores there gear in an unstrile piss cup should be bashed .
same gose for anyone guyin gear in syringes from some guy.
i have no remores here for this guy sorry.
same gose for anyone guyin gear in syringes from some guy.
i have no remores here for this guy sorry.
trust me,i didnt put it anywhere hot..my mates is still in a syringe and his is fine, different types of plastics..came from the same bottle..answer that one then mr spell checker
alright,why wouldnt you put it in plastic?and considering doctors use these for test,you mite find they are sterile!and considering the chemist said they are sterile, then i think il trust them more then some1 who thinks they knows it all and whos prob neva tuk gear in ther life
Last edited:
he brought it back from thiland himself..he apprantly cleaned out the shampoo containers wiv 100% alcahol...makes sence to me to get it through customs,dont you think?or have you been brought up in cotton wool
pickle bunny
The Ring Bearer
Prolly cleaner if he brought it over in his rectum and just pooped it back into the shampoo bottle.
Either way, I 'm sure it fine. Load n go!
Report back on your gains
Good luck !
Another Darwin Award.
Either way, I 'm sure it fine. Load n go!
Report back on your gains
Good luck !
Another Darwin Award.
drewbolic,cheers mate for the help!i think uv cracked what the shit is..and to every over nob ed,well uv not just made me look a twat but made yaself a bigger 1...I've been reading mixed reviews about this solvent Ethyl Oleate (eo). Some love it for making painless high mg gear and use it instead of oil while others recommend a 50/50 EO/oil mix. Then there are those that say stay the fuck away from it because it eats through plastic and causes scare tissue. Has anyone here had any personal experience with EO and if so what's the highest concentration gear you've made using ............EO does melt plastic.. the super solvent guiacol is really nasty too. you can tast it while shooting it.............In other words, don't store your gear in the syringes...........it's easier to make high mg/ml gear with EO. Having said that it sucks endlessly if you have a reaction to EO............
Apprantly after reading some information on it..it will be stonger gear out of anything thats mixed.but most people have bad reactions to it..im glad i did put it in piss containers, because now i no wt it probly is after 'drewbolic'' helped and gave sensible answers unlike you ''morons''lol..yeh i was a nob to put it in piss containers, but its 1st time ive done that and ive learnt from my mistakes..il stick to my usual contacts i think..cheers to all the sensible answers and soz to mr spell checker for my lack of punctuation lol
Apprantly after reading some information on it..it will be stonger gear out of anything thats mixed.but most people have bad reactions to it..im glad i did put it in piss containers, because now i no wt it probly is after 'drewbolic'' helped and gave sensible answers unlike you ''morons''lol..yeh i was a nob to put it in piss containers, but its 1st time ive done that and ive learnt from my mistakes..il stick to my usual contacts i think..cheers to all the sensible answers and soz to mr spell checker for my lack of punctuation lol
ok, well.
I do remember reading in the past about someone pre loading and for some reason i remember something about him saying that the rubber have deteriorated. Whether that has any similarities to this i dont know just recalling. With that said I dont believe that anything i have injected in myself would eat through a plastic cut, or at least i would hope not.
I believe you're not bullshitting because you've fought hard in this thread.
If you're going to use again please take the advice given on what defines sterility. Trust us, gear really should be moved directly from an original container be it a vial to a needle and then injected. the more it's handles and exposed to air the more chance of contamination.
I'm sorry I cant answer your question but I certainly wouldn't continue handling the gear the way you are and adopt some better sterility techniques. You're definitely increases the odds of infection many times over.
Not to mention using something thats given to you in a large syringe to start of with. Those who care less about their health may go ahead and do so.
I do remember reading in the past about someone pre loading and for some reason i remember something about him saying that the rubber have deteriorated. Whether that has any similarities to this i dont know just recalling. With that said I dont believe that anything i have injected in myself would eat through a plastic cut, or at least i would hope not.
I believe you're not bullshitting because you've fought hard in this thread.
If you're going to use again please take the advice given on what defines sterility. Trust us, gear really should be moved directly from an original container be it a vial to a needle and then injected. the more it's handles and exposed to air the more chance of contamination.
I'm sorry I cant answer your question but I certainly wouldn't continue handling the gear the way you are and adopt some better sterility techniques. You're definitely increases the odds of infection many times over.
Not to mention using something thats given to you in a large syringe to start of with. Those who care less about their health may go ahead and do so.
THE-DET-OAK
IncreasedMyT @ ULV
BB and EO will eat through plastic. if you have ever played with it before and you get some on the outside of a syringe it will take the print right off it.
so you have injected stuff that will eat through plastic. any solvent will do that-because its a solvent.
think about it-what do you use to clean paint brushes with? a solvent.
trust me thats the least of your worries. most guys have no idea what is in some powders. many have been tested and showed up with up to 34% heavy metals........................................
so you have injected stuff that will eat through plastic. any solvent will do that-because its a solvent.
think about it-what do you use to clean paint brushes with? a solvent.
trust me thats the least of your worries. most guys have no idea what is in some powders. many have been tested and showed up with up to 34% heavy metals........................................
Last edited:
THE-DET-OAK
IncreasedMyT @ ULV
Before anybody goes and gets all freaked out about the truth, just think about what happens when you inhale pollution??????? theres not much of a difference between inhaling it and shooting it..............................
The human poplulation is very ignorant when it comes to what is really happening in the world. There is a really good show that Morgan Freeman hosts called through the Wormhole. Its about quantam physics.
You can think of everything in the planet as information. Information can never be destroyed it can only change into different forms. no matter what you do the same amount of information is always there its just in a different place. so when your car runs down the road where do you think the gas goes? it doesnt burn and dissapear, it burns and changes form. there is just as much gas today as there was yesterday, its just in a different form, and your breathing it in. this is very simple but its the only way i can think of off the top of my head in lamen.
Now take that concept and think about how we make plastic, and where it goes??????? I could go on an on and on............
The human poplulation is very ignorant when it comes to what is really happening in the world. There is a really good show that Morgan Freeman hosts called through the Wormhole. Its about quantam physics.
You can think of everything in the planet as information. Information can never be destroyed it can only change into different forms. no matter what you do the same amount of information is always there its just in a different place. so when your car runs down the road where do you think the gas goes? it doesnt burn and dissapear, it burns and changes form. there is just as much gas today as there was yesterday, its just in a different form, and your breathing it in. this is very simple but its the only way i can think of off the top of my head in lamen.
Now take that concept and think about how we make plastic, and where it goes??????? I could go on an on and on............
Last edited:
i brought some stuff from some place as well .. i did put it in a plastic massage oil bottle after cleaning it with alcohol..! it was in the plastic bottle for about 7.. 8 hours..then moved it to a glas vial when arraived home .. the steroid had some 4 procent ba and some 15 procent bb! do you think 7.. 8 hours are enough to damage the steroid>?
it's fantastic to have people with knowledge to help.. thank you
Pinnacle@Rep
Muscles can't stop this..
Drewbolic and a few guys in this thread are right! Certain plastic compounds that aren't 100% Polypropylene (PP) or Polyethylene (PE) will degrade to BB and EO.
I recently made a batch of gear and used a plastic sterile disposable PIPETTE which is a measuring tube used to measure out liquids with precision. when I sucked up some of the final product which was Test Cyp there was a little left in the tip. Now this batch had 10% of the oil as EO and 20% of volume BB. 30 min later from the little left in the tip it had melted the tip of the pipette like a piece of candle wax!
Also, when I went to filter the stuff, I used these Millipore filters that are similar to BOTTLETOP filters that allow you to filter 100 ml at a time and there is a little tip on the bottom of the filters that fits into a rubber stopper. I had 50 ml in the filtercup and was filtering and the filtercup just fell off the beaker and stopper and spilt everywhere, this is because the stuff (as it was filtering) had desintigrated that little tip and it just fell over spilling all my gear!!!!
Having said that! One should still always use proper methods of storing the shit when they get it to it's final destination.
thetruepitbull
New member
Take it to the police station and get it tested. Tell them you wanted to purchase some anabolics and have possibly got ripped off. Explain your story to them and they should be able to help you from there.
Similar threads
