Syringes and needles

paul1968uk

New member
Hi Guys

What size syringes and needles do i need to aquire as not 100% sure and where to get them from asap as needing to start a cycle shortly.

Do pharmacys like boots etc sell them over the counter.

rgds
paul
 
Dont know where ur from but Walgreens .25 per pin.

What do you tell them when you buy them if they ask? Im wanting to buy some pins locally but arent the insulin pins usually only like .5 inch and like 29 gauge? They are usually like 1cc too

Do pharmacies carry the 18/25 gauge 3cc?
 
Hi Guys

What size syringes and needles do i need to aquire as not 100% sure and where to get them from asap as needing to start a cycle shortly.

Do pharmacys like boots etc sell them over the counter.

rgds
paul

Some states sell them over the counter, and some dont. But you can buy them much cheaper from an online source. I cant give you any sources, but you can google it and you will see that there are lots of them. I reccomend you buy 3cc syringes with 25 g x 1" long needles for injecting. Personally i like to use 20g pins for withdrawing gear from vial. This speeds the process up tremendously, and this way you change the needle before injecting and then you will have a brand new needle for piercing your flesh. Believe it or not, sticking the needle through the rubber stopper just one time,makes it dull and more painful to inject.
So, i order 3cc syringes with 20g x 1" needles. Then i buy just the needles in 25g x 1". So i open my syringe wrapper, withdraw the oil, then throw away the 20g pin, replace it with the 25, and then inject.
Hope that helps.
 
Hi Guys

What size syringes and needles do i need to aquire as not 100% sure and where to get them from asap as needing to start a cycle shortly.

Do pharmacys like boots etc sell them over the counter.

rgds
paul

Walgreens or other pharmacys charge too much for syringes and they also limit the quantity you can purcahse at one time.
Plus, I don't like the ugly stares that they give you when asking for these items.

They also usually don't sell needles by themselves so you have to use the same needle to draw and inject with.
You can use 3cc syringes with 22 g x 1.5" needles or the 25 g x 1.5" needles. It really depends on what
they have availble at the time.

Online sources offer the best prices and selection even with the additional shipping and handling charges.
 
if ur in canada, shoppers drug mart will have 25gx1 with 3ml syringe, if u want big bulks they'll specially order them for you
 
support this forum, buy from the sponsors. I've had good service from rui

Ya i agree with bitter here, only reason Im going to be buying my needles from my local Tractor Supply is that I live with roomates and they are idiots and have opened packages of mine before.. dont want them stumbling on a bunch of needles so I buy locally (could use a PO box i guess)

RUI is 100% legit, sterile, cheaper than local, and fast delivery. Not to mention sponsors keep this site alive.
 
u can always just use the board sponsor RUI , they are fast , i recommend u get (come in packs of 25) very cheap - either 1 or 2 packs of 25 syringes and needles @3cc 25G and but extra 18G needles (just needles not syringes for drawing with) all 1" long
 
What do you tell them when you buy them if they ask? Im wanting to buy some pins locally but arent the insulin pins usually only like .5 inch and like 29 gauge? They are usually like 1cc too

Do pharmacies carry the 18/25 gauge 3cc?

I dont tell them anythimg I ask for either 22X 1.5" for quad or 1" for delt. Last time I got 4 for each but am oy pining once a week since am on TRT. Not cyclkng yet amd while a bit expensive they r good aolid syringes. I sure havent tried yet but i cam get an 18 or 20 gauge if need be. Ill keep u posted if u wish.
 
what are cc in the uk as we work in ml like 3,5,10ml syringes

Would be using test and deca more than likely in same syringe if i go this stack

paul
 
Thanks for the conversion buddy

Would you use different size needles for different areas, as i was going to be looking at delts or backside only
 
the longness of the needle always relays on how much fat you have on the muscle your going to inject into. It varies from people.
 
Thanks for the conversion buddy

Would you use different size needles for different areas, as i was going to be looking at delts or backside only

With delts I go 1" with larger muscle groups like quatds i do 1.5". I have found the quads and delts to be the easiest of all to do. And the quad is a huge muscle so you can pin in a few different spots and not cause site irritation.
 
With delts I go 1" with larger muscle groups like quatds i do 1.5". I have found the quads and delts to be the easiest of all to do. And the quad is a huge muscle so you can pin in a few different spots and not cause site irritation.

I agree totally. The 1.5" scared me for quads but I always had some trouble with 1" and PIP. Sucked it up and went 1.5" in quad and no PIP and was the smoothest pin, yet. So I've got a bunch of 1" pins for a rainy day, and I'm going to use 1.5 from now on. both quads and glute. I haven't pinned anywhere else cause I'm chicken!
 
Back
Top