Anavar Powder

[Eze]

I am looking at picking up some anavar powder for a future cycle. What's the best way to prep it for accurate dosing?

 

[xtinct]

Dissolving it in alcohol or water would probably work. Something like 10mg/ml would make for easy dosing.

 

[WI]

This might help

PREPARING THE POWDERS FOR ORAL USE

This is really only applicable to the 17AA steroids OXandrolone, Stanabol and
Anabol. These are the only ones that are orally available. In principle the
boldenone undecylenate oil can be taken orally, but daily doses of 200 mg are
required, which is basically a waste of money, if a 400 mg per week injection
can achieve the same.

Pick up some sesame oil at the health store and find a container for the liquid.
Determine the concentration. For Stanabol I recommend 25 mg/ml, for Anabol and
Oxandrolone I suggest 20 mg/ml. Say you have 1 gram of Anabol. That's 1000 mg.
At 20 mg per ml that equates to
50 ml of oil. So for every gram of powder you have you will make 50 ml of
solution. Fill the container up with water, 50 ml per gram. If you have 5 grams,
then that's 250 ml. Mark that spot on the container. Dump out the water and let
the container dry. Dump the powder in the container and then add oil until you
reach the mark you made on the container. You know have your solution at 20
mg/ml.

I suggest taking 2 ml per day (40 mg) in the morning. Use a syringe to measure
out 2 ml and squirt it in your mouth, wash it down with the beverage of your
choice. Remember to never use a 17AA steroid longer than 6, at the very longest
8 weeks on end, because these substances are toxic to the liver.

Remember that you need 50 ml per gram of powder for ox and anabol and 40 ml for
stanabol. This does not mean 50 and 40 ml of oil, it means 50 or 40 ml of oil,
minus the space the powder takes up.

 

[xtinct]

What is the advantage of using oil rather than alcohol or water?

 

[TxLonghorn]

What is the advantage of using oil rather than alcohol or water?

Well, the first thing that comes to my mind is that the oil won't evaporate like the alcohol or water will.

 

[Drveejay11]

Re: This might help

PREPARING THE POWDERS FOR ORAL USE

This is really only applicable to the 17AA steroids OXandrolone, Stanabol and
Anabol. These are the only ones that are orally available. In principle the
boldenone undecylenate oil can be taken orally, but daily doses of 200 mg are
required, which is basically a waste of money, if a 400 mg per week injection
can achieve the same.

Pick up some sesame oil at the health store and find a container for the liquid.
Determine the concentration. For Stanabol I recommend 25 mg/ml, for Anabol and
Oxandrolone I suggest 20 mg/ml. Say you have 1 gram of Anabol. That's 1000 mg.
At 20 mg per ml that equates to
50 ml of oil. So for every gram of powder you have you will make 50 ml of
solution. Fill the container up with water, 50 ml per gram. If you have 5 grams,
then that's 250 ml. Mark that spot on the container. Dump out the water and let
the container dry. Dump the powder in the container and then add oil until you
reach the mark you made on the container. You know have your solution at 20
mg/ml.

I suggest taking 2 ml per day (40 mg) in the morning. Use a syringe to measure
out 2 ml and squirt it in your mouth, wash it down with the beverage of your
choice. Remember to never use a 17AA steroid longer than 6, at the very longest
8 weeks on end, because these substances are toxic to the liver.

Remember that you need 50 ml per gram of powder for ox and anabol and 40 ml for
stanabol. This does not mean 50 and 40 ml of oil, it means 50 or 40 ml of oil,
minus the space the powder takes up.

NICE Post

 

[JohnnyB]

Nice post Bro, that's the way I did it, with some var.

JohnnyB

 

[mrf10]

for one gram you use 50ml and get 20mg/ml. If i use 2g and 50ml of oil it will be 40mg/ml right? can i do this?

 

[Feli Fly]

I would dissolve it in Everclear... then just shake up before drawing for use.

I have never worked with Anavar (var) powder, but have recently posted and PMed with multiple bros who have tried dissolving it in oil and some who have used alcohol. It seems consensus that it does not mix/stay in solution well at all if oil is used and it's MUCH more difficult... alcohol seems to work fairly well.

That said, more experienced opinions are always good...

 

[WI]

I would dissolve it in Everclear... then just shake up before drawing for use.

I have never worked with Anavar (var) powder, but have recently posted and PMed with multiple bros who have tried dissolving it in oil and some who have used alcohol. It seems consensus that it does not mix/stay in solution well at all if oil is used and it's MUCH more difficult... alcohol seems to work fairly well.

That said, more experienced opinions are always good...

Feli Fly, I have several posts also where they recommend Everclear to dissolve Ana Anavar (var) powder so that could be another choice!

 

[JohnnyB]

1 gram of powder equals 1 ml of oil so when mix make the adjustment so you'll have that right dose.

JohnnyB

 

[mrf10]

is there any other alcohol you could use to dissolve it in? I cant get everclear hear in ohio.

 

[Eze]

Where can someone buy everclear?

 

[mrf10]

it depends on what state you live in. They dont sell it in ohio. I know some of the southern states sell it

 

[Eze]

Canada

 

[Feli Fly]

Cannot get Everclear in every location, but you should be able to get 85% etoh bottles of Rum or bottles of "151" (75.5% ethyl alcohol) anywhere... might just need to make it a lil lower mg/ml then based on the power's solubility... I know of at least one bro who just recently made 20mg/ml anavar with the 85% rum and he said it has stayed in solution very well for over a week so far (still always shake before use though).

Please post back on how it works, and say (discreetly; obviously just use nickname) what source you used for the powder too if you can (ch***n?) or PM me on it because I might order some soon.

 

[Deadlift]

Canada

Nope, it's illegal in canada.