Aspirating!!!

adidomenicoss11

New member
hey guys had my third injection test prop today.during inserting it,i felt a little sting jus before the whole needle went in.I aspirated and bublees came up,that gave me the okay to inject,i injected slowly and left the needle in for about 10 seconds after finishing,when i took it out quite abit of blood came out,more than usual.wat does that mean.i aspirated and no blood came up so why is alot of blood coming back out?
 
damn im doing 1" pins in the shoulder and a lil came out and 1-1/2" in the glutes and lost a lil bit once....dont mean to thread jack but this is good info for you if this ever happens to you.

-Respectfully, Alumni
 
For some reason when I heat my gear up it sometimes tends to leak a bit no matter how deep the injection is. That is why I prefer to inject at room temperature.
 
ey thanks guys, but you dont think that maybe the juice came out with the blood? im paranoid ,i dotn wanna waste it

oh yeah it prolly did thats why I keep a cotton ball near by so after I pull out the pin I hold pressure over the area and massage the oil in deep.
 
it happens.

dont worry. as long as you pull back and its air and not this red shit we call blood your fine.

when blood comes out a lil it just means you grazed a vien or went through it.

the other day i shot out so much blood and was like wtf.. that was the first time in my 3 years that that has ever happened.
 
its common for the needle to pass through a small vein on the way in which won put blood into the syringe when you aspirate but it can bleed or even squirt blood when you remove the needle.

if you can reach the injection site with the other hand try spreading the skin where you in tend to inject before insering the needle and holding it apart until immediately after pulling the needle out .

heres a better explanation of the injection technique.
Z-Track Injection: Encyclopedia of Nursing & Allied Health
 
I'm not sure even after reading that , what a Z-injection is :dunno: I'm guessing it's where you pinch the fatty tissue and inject next to that.
They're telling us that .5ml of air is a good thing......hmmmm. I mean , I get the air thing because you waste zero gear , but guys are always saying...NO AIR!! Bullshit is what I say! It aint in the main-line to the heart.....ya know?

Oz
 
I'm not sure even after reading that , what a Z-injection is :dunno: I'm guessing it's where you pinch the fatty tissue and inject next to that.
They're telling us that .5ml of air is a good thing......hmmmm. I mean , I get the air thing because you waste zero gear , but guys are always saying...NO AIR!! Bullshit is what I say! It aint in the main-line to the heart.....ya know?

Oz

some nurses use the air but that i was talking about was spreading the sking preinjection and holding it until thge needle is removed . this closes the exit hole tighter and can slow or prevent gear loss through the wound.
 
Sorry to bring up this old post again, but this happened to me today and so I thought I would search the forums. I have been having trouble aspirating because it seems like there is a suction on the plunger that doesnt allow me to pull back on it. So I have just been taking that as a sign that it is not in a vein and inject it anyway. Well I was kind of scared today because of the blood coming out when i removed the needle. The tip of the needle even kind of hung on the skin when I pulled it out. No gear came out but there is kind of a blood blister thing at the injection site now. I pushed the entire 1.5 inches of the needle into my glue so im pretty sure thats not the juice in the blister.
 
I'm not sure even after reading that , what a Z-injection is :dunno: I'm guessing it's where you pinch the fatty tissue and inject next to that.
They're telling us that .5ml of air is a good thing......hmmmm. I mean , I get the air thing because you waste zero gear , but guys are always saying...NO AIR!! Bullshit is what I say! It aint in the main-line to the heart.....ya know?

Oz

a Z injection is when you pull the skin taut to one side before injecting,so when you pin straight and release the pull of the skin the penetration route would look almost like a Z if you could see it.
 
what there saying is before you stick the needle in pull the skin to one side, when your done let go.. instead of going straight in and straight out.. zinjection is actually the proper way to inject.. not always necessary but it does stop the holes from being lined up "so to speak" skin,fat,muscle..
 
It's so funny, everytime you guys talk about injecting you make it seem like you have to be a rocket scientist in order to do it. It's simple as shit. Stop making it so complicated.
 
the guy asked a question we answered it.. and im assuming your one of those guys that just slams it in there right?..


Nah, I have someone throw it at my ass like a dart.

Honestly though, I've been injecting for years and even this thread confuses me after every post. You guys talk about all different styles in the most difficult ways and it is confusing. That is all I am saying. Just wipe the area down with an alcohol swab, put it in it smoothly, aspirate, make sure there's no blood and inject. There you go. Simple.
 
Last edited:
Absolutely,its simple.Just a little common since and the basic knowledge of sterilization.

On the other hand I have seen abscesses,MRCA,wasted gear and wrong injection sites.So maybe its best not get to lax.;)
 
Back
Top