Just got my shipment - NEED HELP

[FreeMason]

I've got one vial of 210 mg/ml Test Enan

Bunch of syringes that I'm guessing are nipro 23 gauge with the needle already attached.

Bunch of extra needles that are 18 gauge.

I watched a vid on youtube which was pretty detailed.

Now I just need some more guidance.

Do i need to leave a little air in the syringe to make sure all the T gets into the muscle?

Can I use the 18g needle to draw the T and the 23g needle to inject...or does it HAVE to be 23 to draw and 18 to inject?

I'm freakin' out man...well, I was earlier, now I'm kind of excited, but want to make sure I don't fuck this up.

Please help.

 

[Illtemper]

use the 18 to draw from the bottle ONLY! you pin with the 23 guage... 18's would hurt!

no reason to leave air in the syringe, after you draw change needle turn upwards and push out all the air.

Now pin yourself, draw back on the plunger to make sure no blood, if no blood comes into the syringe inject it all in... If there is blood that fills into the syringe, pull it out and re-pin in a different location... then do the same as above....

 

[cdy2179]

If your gonna draw a ml, first put the 18 g. Needle on (remember to keep everything sterile), pull 1ml of air, wipe rubber on test with alcohol, insert needle, push in air, pull 1ml test, remove needle from bottle, pull syringe back to get test from needle, remove 18g screw on 23g. Wipe your injection site with alcohol (upper outer ass cheek , upper outer quad, push any air out of syringe until a bead of test comes out, push into site at least an inch unless you a lit if fat then go 1-1/2". , aspirate by pulling back plunged slighty for 5 seconds, if you see no blood push the test in slowly, some people leave the needle in for up to 30 seconds to let test sponge in, I just take it right out as its only a small amount of test compared to guys on a cycle. Hold your alcohol wipe over spot and apply slight pressure for 30 seconds.

That's how I do it.

Well actually my wife is a nurse so really that's how she does it.

 

[IMT staff]

IncreaseMyT - Injection Instructions

Here is some visual's

 

[FreeMason]

Thanks guys. This helped. I was confused and thought I needed to use the 18g to inject because it wasn't attached to the syringe.

 

[IMT staff]

No way man! They have used those in the past in the Armed Services though, for IV on the fly, ouch imagine that

 

[FreeMason]

No way man! They have used those in the past in the Armed Services though, for IV on the fly, ouch imagine that

Yea, that 18g looks scary.

So, if I shoot it into my quad or my glute then is it bad if I hit the gym and do a legs workout afterward?

 

[FreeMason]

Ok I just did it. It took me 3 tries and I used the first needle 2 times and then realized i probably shouldn't do that so I changed the needle and did it a 3rd time. My quad spazzed twice and tripped me out.

The part I couldn't figure out if I was doing right was aspirating. How far out do I pull the stopper to see if there's blood?

 

[FormerFatty]

Just a tad man, you will see blood come in immediately. No wonder some of you guys are afraid of the needles. If I had a 3 time attempt the first time I may have developed a fear too ouch! Massage that quad bro, I am sure it is going to be sore tomorrow

 

[cmilligan]

Relax the quad before you do it. If you flex the muscle while the needle is in it will twitch, freak you out, and make for additional soreness. I aspirate until one bubble comes out and then press the plunger slowly. I'm fairly new to testosterone replacement therapy (TRT) but this seems effective for me.

 

[boaterkevin]

I was told by my doctor NOT to aspirate as it will ultimately produce more scare tissue in the muscle (unless your able to hold the pin perfectly still while doing it). That being said, been on testosterone replacement therapy (TRT) (200mg/wk) for 6 months and aspitated the 1st few pins just to be sure but haven't since with no issues. I rotate between L/R Glute and L/R Quad.

 

[Illtemper]

I was told by my doctor NOT to aspirate as it will ultimately produce more scare tissue in the muscle (unless your able to hold the pin perfectly still while doing it). That being said, been on testosterone replacement therapy (TRT) (200mg/wk) for 6 months and aspitated the 1st few pins just to be sure but haven't since with no issues. I rotate between L/R Glute and L/R Quad.

YOUR DOCTOR IS A RETARD!!! IF YOU EVER INJECT INTO A VEIN YOU'LL KNOW WHY YOU SHOULD ASPIRATE........... accidently ive done it and it wasnt a good feeling at all......

plus you can have your girl massage your ass scar tissue to break it up

 

[Packgus]

My doctor must be an asshole too. He said I didnt need to aspirate so I didnt and have been on testosterone replacement therapy (TRT) for 2 years now. Never had an issue with not aspirating.

thats just my experience.

 

[03ACE]

There is no need for aspiration on IM injections. This has been well covered by Cashout and others. Don't inject into areas with lots of vessels, and you will be just fine.

 

[FreeMason]

15 hours post injection and the quad is sore, but not worse than the soreness from my leg workout right after.

Felt an increased heart rate immediately after and slight body buzz but no other effects as of yet. Can "feel" it in my body but not sure if that's just my head talking.

Can anyone else tell me what they felt hours and days after their first ever?

How long before I should get my levels checked?

 

[Packgus]

you might notice some morning or middle of the night wood after a day or so.

also you may get some night sweats

 

[juced_porkchop]

I've got one vial of 210 mg/ml Test Enan

Bunch of syringes that I'm guessing are nipro 23 gauge with the needle already attached.

Bunch of extra needles that are 18 gauge.

I watched a vid on youtube which was pretty detailed.

Now I just need some more guidance.

Do i need to leave a little air in the syringe to make sure all the T gets into the muscle?

Can I use the 18g needle to draw the T and the 23g needle to inject...or does it HAVE to be 23 to draw and 18 to inject?

I'm freakin' out man...well, I was earlier, now I'm kind of excited, but want to make sure I don't fuck this up.

Please help.

18g will hurt more and add more scar tissue. I rec 23g. you dont even need the 18g to draw. just draw and shoot with 23g if its only going through one vial top.
if more then I rec 18g then the 23g to shoot.

 

[juced_porkchop]

15 hours post injection and the quad is sore, but not worse than the soreness from my leg workout right after.

Felt an increased heart rate immediately after and slight body buzz but no other effects as of yet. Can "feel" it in my body but not sure if that's just my head talking.

Can anyone else tell me what they felt hours and days after their first ever?

How long before I should get my levels checked?

nothing other than a slightly higher libido.
its not a Rec drug. your not gonna FEEL IT like some sort of drug.
Id say its in your head.

 

[jupiterak]

I've been on testosterone replacement therapy (TRT) for two years now and never aspirated in the glutes.

 

[TR90125]

I've been using a 25g x 5/8" needle to pull and inject in the delts for a while now. It's a snap.

Everyone does it their own way. I started in the quads, quickly moved on to the glutes, used to draw with an 18g and just ended up where I am now and it just seems the easiest.

Good luck.