Need some help. I never really post because I usually can find the answer through the search engine. I did my first syno conversion. I'm concerned that I did not let the powder dry out enough when I mixed it with the SBA and oil, than heated it up. I used a bottle of HEET from the auto store to disperse the pellets so this is my concern. Is it a problem if the propinate is not fully dried out? The stuff looks milky. I'm letting it drip through the coffee filter and than I'm going to run it through the syringe filter. Also what type of syringe filter is suppose to be used? Any help would be appreciated. I'm concerned that when I converted it to the powder that the HEET was still in there. This conversion scares me a little bit. Help.