Vial metal thing around the rubber stopper moves around

[killchill]

Loose crimp on my vials

I started my blast today and while drawing my test from from my vial I noticed the metal thing around the rubber moves around, I just noticed 4 out of the 5 vials i have move around, is this normal? My trt bottles from the pharmacy never had that problem. So is this this normal?
My vials are from psl by the way.

 

[Teutonic]

Not crimped down hard enough...do they leak if laid over ?

NO BIGGIE.....

 

[killchill]

Not crimped down hard enough...do they leak if laid over ?

NO BIGGIE.....

They do not leak, at least I haven't noticed any leaking. So is this common and I shouldn't be concerned about sterility? Last thing I want to get is an abscess due to contamination because they weren't crimped down hard enough.

Sorry if I sound dumb but I just never had a vial with the crimp rotating and moving up.and down. So I'm kinda freaking out a bit.

 

[SJC]

Don't sweat it.

 

[killchill]

Cool thank you guys puts my mind at ease

Off topic one of my vials looks like have crystallized, I keep them at room temperature in my drawer it's 200mg/ml test c, don't know why it would crystallize since it's low concentration per ml, will heating it up in hot water for 10 min fix it ? Here's a picture

 

[Lenex]

put it in oven at 100 degrees for 10 minutes

 

[killchill]

put it in oven at 100 degrees for 10 minutes

Is that safe to do ? Will it damage the metal ring or the rubber ?

It looks more like soft chunks of gel type of thing, don't know if that's what crystallization is.

I'm not newbie to injecting test, just newbie to this new things I'm noticing that are different from my regular pharm grade test.

 

[halfwit]

Is that safe to do ? Will it damage the metal ring or the rubber ?

It looks more like soft chunks of gel type of thing, don't know if that's what crystallization is.

I'm not newbie to injecting test, just newbie to this new things I'm noticing that are different from my regular pharm grade test.

Hot water or a hair dryer should be sufficient.

If they keep falling out of suspension, I'd contact them and see what can be done.

 

[killchill]

It's only 1 out of the 5 vials I have and Im not using that one at the moment, will do what you say and keep and eye on it if it falls out of suspension again. I don't want to shoot crystals up my ass


As always you guys are great. Thanks for helping me out.

 

[Teutonic]

100 degrees is only 1.4 degree s optimum body temp. Heat it..shake the shit out of it turn upside down repeat. If after several rotations..sideline that bottle.

 

[killchill]

Roger that, hope it gets back to normal, , if not I'll contact PSL maybe they can do something about it .

 

[Lenex]

100 degrees is only 1.4 degree s optimum body temp. Heat it..shake the shit out of it turn upside down repeat. If after several rotations..sideline that bottle.

100 degrees celsius bro, not farenheit

 

[jozifp103]

Roger that, hope it gets back to normal, , if not I'll contact PSL maybe they can do something about it .

Of course we will brother! Give the reheating a shot. Make sure you stick a needle in the top for ventilation when heating. This tends to work just fine 90% of the time and will stay in solution as long as it's not exposed to low temps. If you continue to have issues....send me a pm and we'll take care of it for you

 

[killchill]

Of course we will brother! Give the reheating a shot. Make sure you stick a needle in the top for ventilation when heating. This tends to work just fine 90% of the time and will stay in solution as long as it's not exposed to low temps. If you continue to have issues....send me a pm and we'll take care of it for you

Will do later today when I get home and keep an eye on the vial, one of the main reasons I choose you guys is for your good reputation and for what I been reading for a long time good quality products. I'll shoot you a pm if I don't resolve the issue.