homebrewers...ethyl oleate and test/prop

[james]

ok, i got my EO now

its time to get it together

is 200mg/ml possable without pain?

do i need BA and BB?

i dont need any other carrier right? EO is all i need?

i get tested in september so i need to be clear...when is best to stop using prop?

is higher doses than 50mg/ml easier to detect?

 

[DocJ]

http://www.steroidology.com/forum/showthread.php?t=93782
http://www.steroidology.com/forum/showthread.php?t=89113&highlight=eo+ethyl+oleate

 

[james]

thanks docJ

this helps alot

 

[james]

ok, i made my prop last night

just looked and its crashed

i made it with

200mg/ml
2%ba
15%bb
all with EO

i didnt use any other carrier other than EO

what do i do now?

i was told to filter extra EO to the vial and bake for 1 hour at 120 degrees C

will this melt the crystals?

 

[insaned]

Try a bit higher temp, you probably haven't reached the melting point. try like 130-135ºC!
I've tryed that it mine and worked, since the prop in EO i had crashed too.

 

[DocJ]

...or if you're not overly sensitive to BB add another 5%.

 

[james]

well i added extra EO, heated.... and it seems ok

only thing is its now 150mg/ml at about 1%bs and 10%bb

i better add some more solvents

what you all think?

 

[DocJ]

Naw, see if it holds first, I'd be pretty suprised if it didn't.

 

[james]

cool

thanks doc

i have been also advised to use a .2 filter on all my brews, what you think?

 

[DocJ]

cool

thanks doc

i have been also advised to use a .2 filter on all my brews, what you think?

On this one there's going to be a lot of people that disagree with me. Personally, I don't think you need to use anything other than a .45 micron on oil based homebrews. IMO you lose some hormone with the .2 microns, how much? who knows...probably not enough to worry about but I guess I'm set in my ways.

 

[pullinbig]

i agree w/doc. a 45 gonna do all you need to do. the .2 are a bitch if you doing it by hand. now if you using vac filtration, like a stericup, then .2s are fine.

 

[pretty ricky]

i use the 45's too.the .2 sucked took forever!

 

[BigRonWannabee]

Fuck it even .2's take forever on the vacuum side of things. Took me 3+ hours 1 time to get through 400mls of brew.