how to home brew

[R1rider]

1% BA 2-15% BB, toss in the powder and fill the remainder with oil. These days I'll run very low BB, doesn't much seem to be needed in most concentrations. I'll bake that at 350ºish for 30-45 minutes, filter (after it reaches about 100ºF so it wont destroy the filter) and voila - never had a problem. I grab whatever oil looks appropriate (no additives) at Whole Foods.

With 40mL you can use a syringe filter just fine, with larger amounts I like to use a Nalgene filter with low vacuum (I've cracked some carrier bottoms being impatient).

That sounds simple.
If its cool to ask, are these the only ingredients? Available easily?

 

[dialtone]

That sounds simple.
If its cool to ask, are these the only ingredients? Available easily?

benzyl alcohol, benzyl benzoate, grapeseed/cottonseed oil, powder. some also use the solvent ethyl oleate to lower the viscosity.

 

[THE-DET-OAK]

EO makes the sauce silky smooth-its def worth it to throw it in there

 

[Skinny...In a Big Way]

ive been trying to research, my friend made his own stuff before (injectable, pills, and gel) and his worked great and he wasnt the brightest crayon in the box, simply googled stuff and followed everything step by step.

i have all the supplies needed, so i might as well give it a go.

 

[dialtone]

if you have any questions, you can send me, milk, or mudge a pm and we can help with the details.

 

[Skinny...In a Big Way]

ok cool, thanks alot guys, i appreciate all the help

 

[GUnit37]

With Tren, which is pretty available online in the cattle pill form, its simple to filter it down to the necessary form. there's some decent guides on a few of the sites that i've seen- as for saringes, i work in medical so not so difficult lol

 

[budthespud]

Where should one start searching for powders ??

 

[bkm2006]

ive always made mine with the cattle pills. im gonna try to figure out where to get powder.. would be nice to get enanthate would save so much money.

 

[RJ]

Where should one start searching for powders ??

You gotta find a source.

Brewing is very simple like Dtone said, but you can't be a moron.

Simples steps for all my old brews:

1. Determine concentration and weigh out powders/volumes of solvents/oils.

2. Heat solvents/powders until clear (no swirls).

3. Add in oil (you can buy peanut at the groc store, its the thinnest in terms of whats at the store, but watch if you have allergies) until clear (no swirls)

4. Filter into sterile vials/bottles/etc.

And there is nothing wrong with buying in bulk. 50g of Test Enan yields 200ml @ 250mg/ml. 2/20 mix of BA/BB and that shit will keep for a few years with no bacteria. You figure every cycle usually calls for at least 20ml @500mg/week for 10 weeks. So that's 10 cycles if you just did that.

And like stated above, Whatmans syringe filters for anything less than 100ml. Anything more use a Nalgene bottle-top filter. my 'friend' was making a liter of each compound years ago before Raw Deal. And I'll tell ya, a liter of Test is almost as nice as a big set of cans!!

Well, almost almost.

 

[RJ]

I thought i had some basic instructions here but it must have been at another board. I'll see if I can find it.

 

[RJ]

here's is a great spreadsheet i was looking for. This will give you the basics of math involved... which ain't much. You fuck this up you need to go back to licking windows.

http://www.steroidology.com/forum/859495-post1.html

 

[drewbolic]

good info RJ...reps

 

[THE-DET-OAK]

ive always made mine with the cattle pills. im gonna try to figure out where to get powder.. would be nice to get enanthate would save so much money.

you would think so-but tren e raw is expensive-prolly the most expensive of all of them

 

[dialtone]

you would think so-but tren e raw is expensive-prolly the most expensive of all of them

t3 and adex are the most expensive, gram for gram. of course 1g adex would last you your entire life, 1g t3 would last 500 people's entire lives. primo is next in line then var

 

[THE-DET-OAK]

guess i dint even consider those my bad-tren e was just the most expensive one i looked into-about 10 times what test e was

what i was getting at-is tren e is a lot more expensive than the pellets-as i remember-but its been a while since i conteplated it

 

[RJ]

t3 and adex are the most expensive, gram for gram. of course 1g adex would last you your entire life, 1g t3 would last 500 people's entire lives. primo is next in line then var

and don't forget Flux. That damn Halo is retarded expensive!!! lol

 

[C Wood]

I'm going to homebrew from now on.It is very easy to do and I can determine my own concentrations.I'm going with test E @400mg/ml and EQ @400mg/ml with EO oil.

After adding up all the costs to brew it is shocking how cheap this stuff is to make.I'll know when I'm done but I'm thinking $2.00-$2.50 a ML.

 

[dialtone]

alot of people have problems with test e above 350 or so, i don't go above 333mg/ml with test e. 400 for eq is no problem

 

[RJ]

alot of people have problems with test e above 350 or so, i don't go above 333mg/ml with test e. 400 for eq is no problem

by problems I'm assuming you mean pain?

If speaking in terms of a solution holding, only one that is fickle FOR ME is Test Cyp over 300mg/ml. I've had Enan hold fine at 500mg/ml. It wasn't a killer, but painful.

Unless you're doing over a gram a week, i would agree with Dtone and stay with lower concentrations. 2ml of 250mg/ml enan 2x a week is 1g. Plus, IMO, you run the risk of test flu issues with higher concentrations.