Size needles for test

Jablesjables

New member
Im doing test prop and E. what size needles will i need? Ive heard 1 inch at 25g for inject, and a 20g for draw. How long should the draw one b? Are those proper gages?
 
yes those are fine sizes with a one inch 25 g you should be putting the whole needle in when injecting
 
Im doing test prop and E. what size needles will i need? Ive heard 1 inch at 25g for inject, and a 20g for draw. How long should the draw one b? Are those proper gages?

3ML syringe. 1.5in 25 guage for glutes--1in 25 guage for delts and quads. I just order all 25 guage some one inch some 1.5. It doesn't take that long to draw.
 
Im doing test prop and E. what size needles will i need? Ive heard 1 inch at 25g for inject, and a 20g for draw. How long should the draw one b? Are those proper gages?

The draw needle should be 1 1/2 inches so you can get all the way through the oil to the air. I don't like short drawing needles.
 
you guys actually use a drawing needle? why not use the same needle that ur gonna shoot through your butt??? (or delts etc..)
 
you guys actually use a drawing needle? why not use the same needle that ur gonna shoot through your butt??? (or delts etc..)

Some people use the same needle to save on supplies. That is also a good reason for using a longer drawing needle.
 
pinning 25g 5/8ths for muscles delts, chest, quads. 1" for glutes.

Length doesnt reallly matter..but id go with 1"

You can make it easy on yourself and forget buying the drawing pin and use what you got...the only difference is the draw time..instead of 15 seconds takes you 1 minute.

good luck
 
25ga 1 inch for test I.M. but get the 25 gauge with the thin walls. They have a larger bore and the oils flow much easier. Terumo has a great product. Pull it up with anything larger than that maybe a 18 or 23 gauge. But don't use the same needle to pull up and inject. The tip will be already blunt after pulling up.
 
you guys actually use a drawing needle? why not use the same needle that ur gonna shoot through your butt??? (or delts etc..)

For like 2$ a month , you bet im not gone shoot myself with a dull needle...

I hear guys pulling from one vial to another and then use the same needle..wtf....Dont be cheap lol
 
ok ive never heard some of these sizes being used . standard is 22 or 23g with 1.5 length for glutes 3cc syringe.

there is nothing wrong with using the same needle for drawing and pin, nor do you need to switch needles each vial. I never heard this before. just make sure the rubber is sanatized before you draw for each. needle should go all the way in the glute- i take about 3 min to inject 2cc of oil to prevent PIP.
 
It´s all personal, I used to go for the smaller needles.. but after using readyjects 18g 1.5 for both glutes and quads... I pretty much now use 21 1/5 for everything having experienced big pins dont seem to make much difference.. to me anyhow
 
I used 23 by 1 for 5 years and pinned every muscle. Am now using 25by5/8 and 29by5/8. If in gluteus I'm goin 25by1. No problems it's gonna depend a lot on body fat in the area u r pinning
 
Back
Top