Test and Human Chorionic Gonadotropin (HCG) cont'd

Floyd

New member
Test and HCG cont'd

sup bros-

I read the other post and i have another Q about HCG. I'm about to pop my A/S cherry with 200mg's of test cyp, which works out to 1ml. I'm mixing it with 500 iu's of Human Chorionic Gonadotropin (HCG) which works out to 2ml. is this too much for one shot or should i inject twice, or on diff days? thx- floyd
 
If you have Human Chorionic Gonadotropin (HCG) with a concentration of 500iu/ml......imo you are mixing it with way too much water.

Cut the water way back and use a slin pin to inject.
 
Cyp HCG

thx 4 the response.

conversions were never my strong suit which is why i'm askin. but if 500iu's = 2ml's of h2o, doesn't that mean the Human Chorionic Gonadotropin (HCG) is cut with 250iu/ml? is that the right ratio? also, what gauge slin pin (27?) and do i still inject the Human Chorionic Gonadotropin (HCG) IM? thx.
 
Floyd said:
thx 4 the response.

conversions were never my strong suit which is why i'm askin. but if 500iu's = 2ml's of h2o, doesn't that mean the Human Chorionic Gonadotropin (HCG) is cut with 250iu/ml? is that the right ratio? also, what gauge slin pin (27?) and do i still inject the Human Chorionic Gonadotropin (HCG) IM? thx.


Most Human Chorionic Gonadotropin (HCG) comes in 5000 or 10000 IU. What is yours??

If you add 1 ml to your 5000iu, then 500iu solution is 1/10th of a ml, or 10 units on a slin pin. Get a 29g X 1 cc slin pin and inject sub-q in your belly fat.
 
StoneColdNTO said:
If you have Human Chorionic Gonadotropin (HCG) with a concentration of 500iu/ml......imo you are mixing it with way too much water.

Cut the water way back and use a slin pin to inject.

hey SC, out of curiousity, WHY?

Not that its wrong or right, but I have always mixed 10ml (total) with my 5000iu kits (to make 500iu/ml) and have worked fine. Any reason you think a smaller amount is better?
 
RJH8541 said:
hey SC, out of curiousity, WHY?

Not that its wrong or right, but I have always mixed 10ml (total) with my 5000iu kits (to make 500iu/ml) and have worked fine. Any reason you think a smaller amount is better?

I just like to inject as little of anything as possible.
 
Especially nowadays, 10,000 IU of hCG often comes with 10mL of water: 1,000 IU/mL
Other doses of hCG (in particular, 1,500 IU and 5000 IU) often come with 1mL of water: 1,500 IU/mL and 5,000 IU/mL

The concentration really doesn't make all that much of a difference, except of course for measuring. Back in the old days when people often injected 5,000 IU of hCG at a time, that would have been a lot of water to inject if the concentration was 1,000 IU/mL. If using an insulin pin, then that would have meant filling up the biggest pins (1mL) 5 times for 5 seperate injections. Of course, those of us that know what we are doing don't inject so much hCG at once.

BTW: Insulin syringes are usually available in 3 sizes. .3mL, .5mL and 1 mL. The 1mL syringes typically have 1 mark for every 2 units. But one unit on the insulin syringe is not equal to one IU of hCG (unless your hCG just happens to be concentrated at 10,000 IU/mL). 1 insulin syringe unit equals .01mL. 10 insulin syringe units=.1mL.
 
Last edited:
mranak said:
BTW: Insulin syringes are usually available in 3 sizes. .3mL, .5mL and 1 mL. The 1mL syringes typically have 1 mark for every 2 units. But one unit on the insulin syringe is not equal to one IU of hCG (unless your hCG just happens to be concentrated at 10,000 IU/mL). 1 insulin syringe unit equals .01mL. 10 insulin syringe units=.1mL.


Thanks for that info. Its a good referance for me!
 
mranak said:
Especially nowadays, 10,000 IU of hCG often comes with 10mL of water: 1,000 IU/mL
Other doses of hCG (in particular, 1,500 IU and 5000 IU) often come with 1mL of water: 1,500 IU/mL and 5,000 IU/mL

The concentration really doesn't make all that much of a difference, except of course for measuring. Back in the old days when people often injected 5,000 IU of hCG at a time, that would have been a lot of water to inject if the concentration was 1,000 IU/mL. If using an insulin pin, then that would have meant filling up the biggest pins (1mL) 5 times for 5 seperate injections. Of course, those of us that know what we are doing don't inject so much hCG at once.

BTW: Insulin syringes are usually available in 3 sizes. .3mL, .5mL and 1 mL. The 1mL syringes typically have 1 mark for every 2 units. But one unit on the insulin syringe is not equal to one IU of hCG (unless your hCG just happens to be concentrated at 10,000 IU/mL). 1 insulin syringe unit equals .01mL. 10 insulin syringe units=.1mL.

good post. its very important to understand your dosage concentration and to be able to distinguish between insulin units and Human Chorionic Gonadotropin (HCG) units. many people especially newbies wouldnt know that.
 
To the guys that offered thanks, you are welcome.

Vigilance said:
Why can't you mix the Human Chorionic Gonadotropin (HCG) with test and shoot IM?

You can mix them in the syringe if you insist, but IMHO hCG is best done sub-q.
 
StoneColdNTO said:
I just like to inject as little of anything as possible.

Yeah, fantom said you didn't like taking big amounts of 'ANYTHING'!! LOL

j/k bro. Thanks for the answer.
 
HCG q's... thx

thx again for the knowledge. i don't have anyone around me i can ask about this shite so thx to everyone that responds to my q's for helping me to do this safely. it's appreciated. lates.
 
Back
Top