using an insulin syringe instead of a 3cc.part 2
- Thread starter biggie908
- Start date
A
aerosmith
Guest
thats retarded - why dont you draw from both vials with a 3ml to start with? Take one ml from test, 1 ml from deca and you have 2ml in your 3ml barrel ready to go.
Tugboatz
New member
This. Why go through all the trouble of drawing through a tiny slin pin just to put it in the 3ml anyway? Just draw into the 3ml and switch tips.
gorillaglue
Trenwreck
I agree with the above two posts.
I know people who backload syringes, usually to get oil into a slin pin with a fixed needle after drawing with a 3cc body syringe and typical drawing needle gauge.
But when you pull the plunger out of the syringe body and then push it back in, the syringe is arguably not sterile anymore, esp. if something touches the tip of the rubber plunger that comes in contact with the oil in the syringe body.
Lots of people do this anyway it seems (the slin pin method at least) and don't have any issues, so I won't argue about that, but why make things harder or more error prone than they have to be? Syringes aren't that hard to come by...just swap pins on 3cc bodies.
I know people who backload syringes, usually to get oil into a slin pin with a fixed needle after drawing with a 3cc body syringe and typical drawing needle gauge.
But when you pull the plunger out of the syringe body and then push it back in, the syringe is arguably not sterile anymore, esp. if something touches the tip of the rubber plunger that comes in contact with the oil in the syringe body.
Lots of people do this anyway it seems (the slin pin method at least) and don't have any issues, so I won't argue about that, but why make things harder or more error prone than they have to be? Syringes aren't that hard to come by...just swap pins on 3cc bodies.
RA64
I am banned!
goatman
New member
this guy is the man. i have read several of your posts, raged out and straight to the point.
biggie908
New member
im DRAWING WITH A 18G. BUT ITS EASYER TO MEASURE 150MG IN A SLIN BARREL.
300mg of what? You know it doesn't have to be perfect right? You can inject 310mg (or whatever the math comes out to) and not die. lol
Just make it easier. If you have 250mg/ml gear and need 300mg, just inject 1.25cc of gear. 312.50mg is not gonna make that much difference.
Not sure why else you would need to do it any other way.
biggie908
New member
yea 312mg of test.. i just wanted to excat bc i wanted 600mg of test a week not 624mg
way too much work dude. The extra 24mg of test is so negligible its not even funny.
Actually... the fact that you would even think is was worth all that is funny, but thats besides the point.
Listen, shoot the little extra and move on with the simple life. Guys make this so complicated and still don't understand how blood serum levels even work.
BimmerDude
New member
Dude, this is gear. 'Perfection' isn't necessary. Some days you're going to draw up 1.1ml, some days you're going to draw up 0.9ml, and some days you're going to draw up exactly 1ml. A 0.1 ml gain/loss per oil if cocktailing all your oils into a single syringe this way is not significant enough to cause any difference in your overall gains. Drugs that can cause rapid and potentially dangerous changes in blood chemistry, coagulation, or physiological function and absolutely NEED strict micromeasurement are always pegged to some type of routine follow-up or continuous monitoring as a part of the protocol (i.e. blood glucose checks with insulin injections, or frequent blood pressure checks and continuous telemetry monitoring with a levophed drip, or INR monitoring with warfarin).
I don't believe in backloading syringes because the additional mechanics involved increases the risk of contamination and infection.
biggie908
New member
agreed. i just didnt want to FUCK anything up on my 2nd run
biggie908
New member
i understand, but what drugs were u talking about?
biggie908
New member
thank u
Similar threads
