winnie wont push if i aspirate?!?

[dajumpoff2000]

i got this winnie from emlabs that is crystally as hell...definatly not micronized. i am currently on cycle with four other dudes, i was the first to try this stuff..i shook it up real good drew it into the syring without trouble, stuck it in my qud aspirated and then tried to inject but the stuff wouldnt budge, actually made the tip come off the syringe and the cc spilled everywhere....this happened to everyone else as well so they said screw it and drank it. i wanted to try one more time so i shook it up drew it into the syringe then shook it again while in the syringe then stuck it didnt aspirate and it went right in smooth..now i dont no if i should conitnue to shoot without aspirating which i ALWAYS do or just drink the damn shittt. also wondering if someone could tell me why aspirating it would make it clump up again...i no your suppose to be quick but it takes 1 sec to aspirate...

p.s. i using 22 g 1\2" pins

 

[bigkit34]

its ok to drink injectable Winstrol (winny) so if problems continue then go ahead and drink it

 

[FerrariF50]

its ok to drink injectable Winstrol (winny) so if problems continue then go ahead and drink it

yeah it's ok but you'll also lose much of the dose that way.

what size syringe are you using? 3cc or 5cc?
if there's too much air in the syringe sometimes it will be harder to inject.

 

[rocko419]

Wow your useing a fat pin to.. Well the same shit happened to me one time with some Winstrol (winny) I got for the first time and I got so fustrated with it I just stoped useing it and got a better brand.. I was useing a 25g pin your useing a 22g thats fucked up. I know one thing I woulden't want to use that brand of Winstrol (winny) ever again...But for the time being do you think heating it up a bit might help? Or maybe mixing it with some B-12 or something might help? I dono I'm just trying to through some ideas at ya...Good luck and try to sell the shit to someone else and get you some new better shit....

 

[raw lifter]

Thats happend with Zambons in the past also, obviously sounds like his ia water based also so mixing or heating it up wont help.

Only thing I can think of is by the time you get to aspirate powder falls to the bottom of the barrel, when you pull up on the plunger then release it might be packing it in the pin??...not sure however it isn't nearly as important to aspirate with water based anyway so i wouldn't worry about it.

Wow your useing a fat pin to.. Well the same shit happened to me one time with some Winstrol (winny) I got for the first time and I got so fustrated with it I just stoped useing it and got a better brand.. I was useing a 25g pin your useing a 22g thats fucked up. I know one thing I woulden't want to use that brand of Winstrol (winny) ever again...But for the time being do you think heating it up a bit might help? Or maybe mixing it with some B-12 or something might help? I dono I'm just trying to through some ideas at ya...Good luck and try to sell the shit to someone else and get you some new better shit....

 

[raw lifter]

You absolutely do

u dont get more from injecting winny.

 

[rocko419]

You get more injecting ANYTHING then you would by eat or drinking it....


Like a drug addict might start off eating it or snorting it then maybe smokeing it and then Finaly SHOOTING it.... Make sence?

 

[rocko419]

Thats happend with Zambons in the past also, obviously sounds like his ia water based also so mixing or heating it up wont help.
Only thing I can think of is by the time you get to aspirate powder falls to the bottom of the barrel, when you pull up on the plunger then release it might be packing it in the pin??...not sure however it isn't nearly as important to aspirate with water based anyway so i wouldn't worry about it.

Ya diden't really think so. I was just trying to brain storm. It can be diffacult for me..Lol

 

[weezthejuice]

use a 1ml 29 gauge slin pin (half inch long). do a half ml injection everyday in your bicep. switch biceps everyday. i say inject everyday because Winstrol (winny) can be painful, by injection the half dose everyday and switching bi's it should be a lot less painful. if you cant do bi's , tricep and lats are fine. this method is flawless unless whinny is too thick for the fine pin. all my Winstrol (winny) i ever used has been fine.

 

[rocko419]

use a 1ml 29 gauge slin pin (half inch long). do a half ml injection everyday in your bicep. switch biceps everyday. i say inject everyday because Winstrol (winny) can be painful, by injection the half dose everyday and switching bi's it should be a lot less painful. if you cant do bi's , tricep and lats are fine. this method is flawless unless whinny is too thick for the fine pin. all my Winstrol (winny) i ever used has been fine.

Lol Bro your a little late with the input NO? And anyway he said he was haveing a prob pushing the Winstrol (winny) through a 22g pin and your answer is to use an even smaller pin? Now how the heck is that going to work? It's Not. I think you either did not read his post or you just have no clue bro. Which is it? Sorry just pointing out that you need to pay att to the addvice you give people. Giveing incorrect addvice to someone who might not know better and then takes the addvice can do more harm then good to someone some day. So that's all I was trying to point out. Have a good day bro...Mike

 

[weezthejuice]

i can't see why the whinny would be that thick, any whinny i have ever used has not been hard to use. that is what i would do. if he's having those problems id drink it or use a differant gauge. i actually have a really good understanding of anabolics, but thanks for the advice.... i also did state in my first post that if the whinny was too thick it would not work. i was giving my method on using whinny that has worked for me. everyone else stated that he could drink it, i did not feel i needed to re post what other people have said, but thanks

 

[rocko419]

i can't see why the whinny would be that thick, any whinny i have ever used has not been hard to use. that is what i would do. if he's having those problems id drink it or use a differant gauge. i actually have a really good understanding of anabolics, but thanks for the advice.... i also did state in my first post that if the whinny was too thick it would not work. i was giving my method on using whinny that has worked for me. everyone else stated that he could drink it, i did not feel i needed to re post what other people have said, but thanks

You probably understand Anabolic Androgenic Steroids (AAS) better then me bro I just happen to catch that hole pin size thing that just diden't add up so I just ran with it. I had some Winstrol (winny) like he's talking about one time it was just a bitch and just could not get that shit through the pin. It's just to cristalized and not micronized so it cloges up the pin. Frankly from then on I never use aney Winstrol (winny) except a choice fuew and that meaning the better brands. Like the obvious choice Zambon of cource for one and I even like Winstrol (winny) from EC as well used it with good results. Me I;m not down with the hole drinking the shit. Why drink it when you can shoot it I say...

 

[gator_mclusky]

You get more injecting ANYTHING then you would by eat or drinking it....


Like a drug addict might start off eating it or snorting it then maybe smokeing it and then Finaly SHOOTING it.... Make sence?

Very true.....

gator