Having issue drawing the gear!

[Cam01]

Im on my 2nd test shot. Today, it was worse than last time.
I have everything ready, stick in the pin, but as I go to draw its very weird. I pull, but very little gets in the syringe, so i end up having to draw like 8 times to get 1ml (250mg). And a lil bit of gear came out of the pinned area (quad).
What am I doing incorrect? Its a 23g needle which isn't too thin. Any feedback?

 

[cyto33]

are you pressurizing the vial? take a ml and a hald of air inject into the vial and then draw it out. it should drip into the pin slowly and take about 1 min or so to fill to a ml.
i use a 23 to draw and shot and have no problem.

 

[Cam01]

are you pressurizing the vial? take a ml and a hald of air inject into the vial and then draw it out. it should drip into the pin slowly and take about 1 min or so to fill to a ml.
i use a 23 to draw and shot and have no problem.

Yea, i put in 1ml of air. I sort of draw it a bit quick tho. Im going to try it slowly on sunday. (im doing Wed/Sun pins)

 

[cyto33]

just put a little more in then the amount you want to draw out. it is slow drawing for the most part with that size of pin.

 

[Cam01]

just put a little more in then the amount you want to draw out. it is slow drawing for the most part with that size of pin.

Thank you, sir. Will try on Sunday.

 

[barrysanders]

Cam- it takes me about 1 min to draw 1ml. I think you just need to try going a little slower. When I first started it took like 1min. 30 seconds (that was with a 21g). Just barely pull back the pump let it run through the needle very slowly until it fills up.

You will be ok, just go slower.

 

[StoneColdNTO]

Use an 18g to draw.

 

[trick317]

use an 18 gauge needle to draw and then switch back to your 23. works great!

 

[Epic Ed]

Use an 18g to draw.

Yep.

 

[hammer2500]

Heating the gear up in some very hot water helps also. Put a cup of water in the microwave for about 2 minutes the place your vial in the cup for about 3 minutes. I makes the oil thinner and easier to draw.

 

[Cam01]

Heating the gear up in some very hot water helps also. Put a cup of water in the microwave for about 2 minutes the place your vial in the cup for about 3 minutes. I makes the oil thinner and easier to draw.

I was goinh to do this, but my dad, bro and uncle have been home... Dont want to look suspicious! Lol

 

[safety-man]

Cam- it takes me about 1 min to draw 1ml. I think you just need to try going a little slower. When I first started it took like 1min. 30 seconds (that was with a 21g). Just barely pull back the pump let it run through the needle very slowly until it fills up.

You will be ok, just go slower.

^^^Agreed^^^

 

[Turtleneck1971]

Yeah im on amps right now and drawing them with a 23g takes some time, you have to just keep enough pressure on the plunger to suck The minute you apply to much it just sucks nothing.

 

[jimbo79]

Use an 18g to draw.

As do I, and it takes 5 seconds

 

[THE-DET-OAK]

to me i feel 18 is too big-it leaves a hole in the stopper.

20 or 21 should be plenty-it takes me 3-5 seconds to draw a ml with those

 

[StoneColdNTO]

to me i feel 18 is too big-it leaves a hole in the stopper.

Two words for that; Shitty stoppers.

 

[THE-DET-OAK]

hahaha-killin me

their is just no point either-i mean i could easily draw with a 23-why 18

sometimes i draw too fast-and if im on my 2nd or third compound now your fucking up your dosages on what ever you injected it back into?

i guess you dont need great stoppers when your gear is thin as water

 

[sirxxxlew]

if he draws with a 23 and it takes that long its probably gunna take a year and a day to inj even if he draws with a 18. ive always drawn with a 18 and switched to a 25, i have a thing about the needle touching anything before it goes in me. could possible dull it a little going through the stopper. but i have had a problem with the 18's before after 6-7 draws. ive actualy had tiiiny pieces of the stopper drop into the bottle, but small enough to draw out with the 18 and get rid of.

heat it up would be my advice.

 

[jimbo79]

As do I, and it takes 5 seconds

I lied, I just drew again with an 18g, It took all but 1.8 seconds...quickest hands in the west

 

[Cam01]

Lol