Slin pin method---for those interested

[barrysanders]

Good info, just what I was looking for! I'm just starting my research on this method. I'm assuming since the injection is subQ that the needle is shorter and you just inject all the way in like a regular shot?? (hopefully that makes sense).

 

[Greazy-Pickle]

i will give it a go myself but i take like 3-4 ml thats going to be a lot of pins.
and what the guy on the vid pulled up was water based B12.
did i miss how long the shot takes with oil.

oil flows though suprisingly fast..

 

[cyto33]

thats cool this will open up a lot of other sites i want to try.

 

[blazeftp]

oil flows though suprisingly fast..

Did you pre heat it ?

 

[Ythrashin]

Why not just order 27g-30g pins and use a 3ml-5ml plunger? Makes more sense so you can inject more then 1cc at a time...

 

[Greazy-Pickle]

Did you pre heat it ?

nope.. just draw and shoot.. and what ythrash said makes alot of sense.. but i have to say that ive never shot more than 1cc with 1/2in slin pin.. so i dont know how it would work shooting 2or3cc into 1spot only 1/2in deep..

 

[RJ]

stop being pussies and use a fucking 25g needle. There are a million spots to shoot on your body. I've seen it all now. lol

 

[Greazy-Pickle]

stop being pussies and use a fucking 25g needle. There are a million spots to shoot on your body. I've seen it all now. lol

Tough Guy huh

 

[RJ]

Tough Guy huh

no. I'm more of a "do as I say not as i do" guy Pickle.

I've been shooting glutes and delts only for years. Tried a bunch of sites, just easier to push thru the scar tissue. lol

 

[Greazy-Pickle]

no. I'm more of a "do as I say not as i do" guy Pickle.

I've been shooting glutes and delts only for years. Tried a bunch of sites, just easier to push thru the scar tissue. lol

im the same.. i use quads too though.., and dont get me wrong ill switch it up and go with the 1" here and there.. but my 22g 1"1/2 days are over.. delts with the slin pin is Suhhweeet.. you should give it a try sometime when nobody is looking of course.. dont wanna ruin that "image".. lol

 

[Ythrashin]

nope.. just draw and shoot.. and what ythrash said makes alot of sense.. but i have to say that ive never shot more than 1cc with 1/2in slin pin.. so i dont know how it would work shooting 2or3cc into 1spot only 1/2in deep..

They make 1.25inch 27g and 30g pins..


The smallest I've used with gear is 27g and it takes a long time to force the gear through.

 

[snigg]

so you guys use 1/2" slin pins and inject the test sub q?

 

[Ythrashin]

so you guys use 1/2" slin pins and inject the test sub q?

Technically it would depend on the site if its subq or IM. There is little subq tissue on delts and chest. So if you just push the pin in without pinching up some subq tissue its IM.

 

[RJ]

im the same.. i use quads too though.., and dont get me wrong ill switch it up and go with the 1" here and there.. but my 22g 1"1/2 days are over.. delts with the slin pin is Suhhweeet.. you should give it a try sometime when nobody is looking of course.. dont wanna ruin that "image".. lol

too much work for me. All that pulling the plunger, having two syringes to deal with. I like to draw, change needles and shoot. No mess, no fuss. Plus I kinda like the sound it makes when the scar tissue 'pops'.

 

[MightyMouse9999]

I'm a big fan now of the slin pin method. It's virtually painless and very easy to do. Like SPO said to prevent gear from being wasted, turn the pin upside down and let the air bubble rise to the top before you push the plunger any further.

 

[epoxy]

ive got some thick gear. a test/tren/masteron mix. i highly doubt it would push through a slin pin as its pretty slow through a 25g. whats the big deal with this anyway? why do you want to use a slin pin for gear so bad? i would never shoot gear subQ as the absorption time would be much slower than IM, as well as I use 25g needles and they are virtually painless in every area I shoot in, pecs, delts, tris, bis, glutes, lats.

 

[Italiano SPO]

ive got some thick gear. a test/tren/masteron mix. i highly doubt it would push through a slin pin as its pretty slow through a 25g. whats the big deal with this anyway? why do you want to use a slin pin for gear so bad? i would never shoot gear subQ as the absorption time would be much slower than IM, as well as I use 25g needles and they are virtually painless in every area I shoot in, pecs, delts, tris, bis, glutes, lats.

It pushes through dude....trust me. I use Test, Deca, NPP, and Tren and it all pushes through just fine through a slin. Don't ask me how, it just works.

 

[Italiano SPO]

Technically it would depend on the site if its subq or IM. There is little subq tissue on delts and chest. So if you just push the pin in without pinching up some subq tissue its IM.

Yup and I do quads as well and it goes IM. It depends on the person and how much fat and what area you are poking.

 

[blazeftp]

I am Going to be doing my first Cycle on Monday Basic Test E Cycle
will try this see how it goes.

 

[Greazy-Pickle]

Technically it would depend on the site if its subq or IM. There is little subq tissue on delts and chest. So if you just push the pin in without pinching up some subq tissue its IM.

honestly thrash it flows through the slin pin faster than the 25g 1".. im assuming its because the needle is shorter and spends less time in the syringe? not exactly sure but like SPO said i dont know how but it just does.. and ive never tried it SubQ.. always IM..